Opening 2-11/16 (68 mm) M a d e i n t h e U n i t e d S t a t e s o f A m e r i c a 3/8 (10 mm) SPECIFICATIONS 3/4 (19 mm) Dissipative Low Charging Vinyl Badge Holder Material Thickness: 0.012 (0.3 mm) front 0.024 (0.6 mm) back Material Tolerance (thickness): 10% Material Color: matte front & back Highly visible yellow header Includes a 1/8 (3 mm) x 9/16 (14 mm) punch through slot, setback 3/8 (10 mm) from top 4-3/8 4-3/8 (111 mm) x 2-11/16 (68 mm) (Outer Dimension) (111 mm) Opening setback 3/4 from top with zipper closure ESD protection symbol in bottom left corner of the badge holder Embossing with: Menda and Made In America along the bottom of the badge holder on the back 6 10 Rs: 1 x 10 < 1 x 10 ohms per ANSI/ESD STM11.11 Genuine Made In America - accept no substitutes MADE IN We can do customs just let us know your insert size MENDA AMERICA Front BackIt should be understood that any object, item, material or person could be a source of static electricity in the work enviroment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity ESD Handbook ESD TR20.20-2008 section 2.4 Sources of Static Electricity Specifications and procedures subject to change without notice. ESD BADGE HOLDER, VERTICAL, 2-3/8 X 3-3/8 INSERT SIZE, W/ YELLOW HEADER & ZIPPER CLOSURE +/- 1/16 tolerances on dimensions unless specified 3651 WALNUT AVENUE, CHINO, CA 91710 DRAWING DATE: NUMBER PHONE: (909) 627-2453 April 35016 2015 WEBSITE: Menda-ID.com 2015 DESCO INDUSTRIES INC. Employee Owned