SP2209E Data Sheet High ESD Dual Port RS-232 Transceiver General Description Features The rugged, high ESD SP2209E device is a complete dual Meets true EIA/TIA-232-F standards RS-232 port integrated into a single integrated circuit. Six drivers and ten receivers provide designers a dual port Complies with 89 / 336 / EEC EMC Directive solution fully meeting the EIA / TIA-232 and ITU-T V.28 / V.24 Single +12V power supply communication protocols, and can be implemented in applications such as personal desktop computers and <5mA low power CMOS operation workstations. Features include high transmission rates, low 100A low standby current power consumption, an internal charge-pump power supply that requires only two capacitors, space saving 38-pin Operates with +3V or +5V logic TSSOP package dimensions, and compatibility with the EU Provides +3.3V to +5V standby supply directive on electromagnetic compatibility. This device is ideal for operation in electrically harsh environments or where Two complete serial ports, 6 drivers and 10 receivers RS-232 cables are frequently being plugged and unplugged. This device is also immune to high RF field strengths without One receiver on each port active in standby special shielding precautions. Failsafe receiver outputs 460kbps minimum data rate Ideal for high speed RS-232 applications Pinout Low EMI emissions (EN55022) Pin compatible to ADM2209E device Enhanced ESD specifications: +15kV Human Body Model +15kV IEC61000-4-2 Air Discharge +8kV IEC61000-4-2 Contact Discharge Fast transient burst (EFT) immunity (IEC61000-4-4) Ordering Information - page 15 Figure 1: SP2209E Pinout www.maxlinear.com Rev 1.0.1SP2209E High ESD Dual Port RS-232 Transceiver Data Sheet Revision History Revision History Revision Release Date Change Description -- 2006 Legacy Sipex Datasheet 1.0.0 7/16/12 Convert to Exar Format and update ordering information. Change ESD specifications to IEC61000-4-2. 1.0.1 6/28/19 Convert to MaxLinear format. Added ESD Rating table under Absolute Maximums. Update Ordering Information. Update power dissipation. 6/28/19 Rev 1.0.1 ii