SP3220E / SP3220EB / SP3220EU +3.0V to +5.5V RS-232 Driver/Receiver Pair FEATURES Meets all EIA/TIA-232-F Standards EN 16 1 SHDN from a +3.0V to +5.5V power supply Interoperable with RS-232 and V.28 at +2.7V 2 C1+ 15 VCC Supports High Serial Data Rates: V+ 3 120kbps SP3220E 14 GND 250kbps SP3220EB C1- 4 SP3220 13 T1OUT 1Mbps SP3220EU E/EB/EU 1A Low Power Shutdown Mode C2+ 5 12 No Connect Footprint Compatible with MAX3221E, ISL3221 11 C2- 6 T1IN 4 x 1.0F External Charge Pump Capacitors Improved ESD Specifications: V- 7 10 No Connect +15kV Human Body Model +15kV IEC61000-4-2 Air Discharge R1IN 8 9 R1OUT +8kV IEC61000-4-2 Contact Discharge Now Available in Lead Free Packaging DESCRIPTION The SP3220E devices are RS-232 driver/receiver solutions intended for portable or hand-held applications such as palmtop computers, instrumentation and consumer products. These devices incorporate a high-efficiency, charge-pump power supply that allows the SP3220E devices to deliver true RS-232 performance from a single power supply ranging from +3.0V to +5.0V. This charge pump requires only 0.1F capacitors in 3.3V operation. The ESD toler- ance of the these devices are over +/-15kV for both Human Body Model and IEC61000-4-2 Air discharge test methods. All devices have a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1A. SELECTION TABLE MODEL Power RS-232 RS-232 External Shutdown Data Rate Supplies Drivers Receivers Components SP3220E +3.0V to +5.5V 1 1 4 Capacitors Yes 120kbps SP3220EB +3.0V to +5.5V 1 1 4 Capacitors Yes 250kbps SP3220EU +3.0V to +5.5V 1 1 4 Capacitors Yes 1Mbps SP3220E EB EU 103 031920 1ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability and cause permanent damage to the device. Power Dissipation per package V .......................................................-0.3V to +6.0V CC o o 16-pin SSOP (derate 9.69mW/ C above +70 C)...............775mW V+ (NOTE 1).......................................-0.3V to +7.0V o o 16-pin TSSOP (derate 10.5mW/ C above +70 C)..............840mW V- (NOTE 1)........................................+0.3V to -7.0V V+ + V- (NOTE 1)...........................................+13V I (DC V or GND current).........................+100mA CC CC Input Voltages TxIN, EN, SHDN...........................-0.3V to Vcc + 0.3V RxIN...................................................................+25V Output Voltages TxOUT.............................................................+13.2V RxOUT, .......................................-0.3V to (V +0.3V) CC Short-Circuit Duration TxOUT....................................................Continuous Storage Temperature......................-65C to +150C NOTE 1: V+ and V- can have maximum magnitudes of 7V, but their absolute difference cannot exceed 13V. ELECTRICAL CHARACTERISTICS Unless otherwise noted, the following specifications apply for V = +3.0V to +5.5V with T = T to T . CC AMB MIN MAX o Typical values apply at Vcc = +3.3V or +5.0V and T = 25 C, C1 - C4 = 0.1F. AMB PARAMETER MIN. TYP. MAX. UNITS CONDITIONS DC CHARACTERISTICS Supply Current 0.3 1.0 mA no load, V = 3.3V, CC o T = 25 C, TxIN = GND or V AMB CC Shutdown Supply Current 1.0 10 A SHDN = GND, V = 3.3V, CC o T = 25 C, TxIN = Vcc or GND AMB LOGIC INPUTS AND RECEIVER OUTPUTS Input Logic Threshold LOW GND 0.8 V TxIN, EN, SHDN, Note 2 Input Logic Threshold HIGH 2.0 V Vcc = 3.3V, Note 2 Input Logic Threshold HIGH 2.4 V Vcc = 5.0V, Note 2 Input Leakage Current +0.01 +1.0 A TxIN, EN, SHDN, o T = +25 C, V = 0V to V AMB IN CC Output Leakage Current +0.05 +10 A Receivers disabled, V = 0V to V OUT CC Output Voltage LOW 0.4 V I = 1.6mA OUT Output Voltage HIGH V -0.6 V -0.1 V I = -1.0mA CC CC OUT DRIVER OUTPUTS Output Voltage Swing +5.0 +5.4 V Driver output loaded with 3K to o GND, T = +25 C AMB NOTE 2: Driver input hysteresis is typically 250mV. SP3220E EB EU 103 031920 2