XRT6164CD-F MaxLinear

XRT6164 Digital Line Interface Transceiver February 2007 APPLICATIONS FEATURES z Data Adaption Unit (DAU) z Single 5V Supply z General Purpose TTL Compatible Line Inter- z CCITT G.703 Compatible When Used With face Either XR-T6165 or XR-T6166 z Low Power z TTL Compatible Digital Inputs and Outputs z Links Remote Equipment at Distances up to 500 Meters Without Equalization z Receive Data Comparator Threshold Storage Provides Ping-Pong Operation Capability z Loss of Signal Alarm z Dual Matched Driver Outputs GENERAL DESCRIPTION The XRT6164 is a CMOS analog chip intended for general purpose line interface applications at bit rates up to 1.544Mbps (T1). It contains both receive and transmit circuitry in a 16-pin dual-in-line plastic package. The receiver is designed for short line applications having a cable loss up to 10dB measured at the half bit rate. The transmitter has open collector line driver outputs that are capable of handling up to 40mA. When used in conjunction with either XRT6165 or XRT6166, the chip set provides a 64Kbps codirectional interface as specified in CCITT G.703. ORDERING INFORMATION Operating Part No. Package Temperature Range XRT6164CP 16-Lead 300 Mil PDIP 0C to +70C XRT6164CD 16-Lead 300 Mil JEDEC SOIC 0C to +70C Rev. 4.0.0 EXAR Corporation, 48720 Kato Road, Fremont, CA 94538 (510) 668-7000 FAX (510) 668-7017XRT6164 Block DIagram Positive PEAK CAP 14 Data Comparator 12 S + R RX+I/P 16 TTL Peak Threshold Buffer Detector Generator RX-I/P 1 5 S - R Negative TTL Data Buffer TCM Comparator 15 TCM CON Control 3 RX ALARM TTL Buffer 13 V A CC 2 Bias I/P BIAS GNDA 4 Open Collector Driver TX+I/P 11 10 TX + O/P 6 8 TX-I/P TX - O/P Open Collector Driver 9 V D CC GNDD 7 Figure 1. XRT6164 Block Diagram Rev. 4.0.0 2