110048

-max 16 16 mm, Precious Metal Brushes CLL, 2 Watt M 1.5:1 Stock program Part Numbers Standard program Special program (on request) with terminals 110041 110042 110043 110044 110045 110046 110047 110048 110049 110050 with cables 139820 352815 134844 231379 220514 304672 352823 352816 260678 352817 Motor Data Values at nominal voltage 1 Nominal voltage V 1.5 3 6 9 12 15 18 21 24 30 2 No load speed rpm 10800 12300 10100 12300 12300 13200 14100 13700 13800 11400 3 No load current mA 61.4 38.1 13.9 12.7 9.54 8.57 7.99 6.53 5.83 3.37 4 Nominal speed rpm 9360 8810 4530 6700 6660 7590 8480 8040 8120 5480 5 Nominal torque (max. continuous torque) mNm 0.712 1.3 2.22 2.19 2.17 2.17 2.15 2.14 2.11 2.08 6 Nominal current (max. continuous current) A 0.6 0.6 0.408 0.327 0.243 0.209 0.185 0.153 0.134 0.0864 7 Stall torque mNm 4.79 4.51 4.03 4.82 4.77 5.16 5.44 5.22 5.12 4.04 8 Starting current A 3.66 1.97 0.723 0.702 0.52 0.482 0.453 0.362 0.315 0.164 9 Max. ef ciency % 77 75 75 76 76 76 76 76 76 74 Characteristics 10 Terminal resistance 0.41 1.52 8.3 12.8 23.1 31.1 39.7 57.9 76.2 183 11 Terminal inductance mH 0.017 0.0519 0.306 0.467 0.831 1.13 1.42 2.05 2.61 6.01 12 Torque constant mNm/A 1.31 2.29 5.57 6.88 9.17 10.7 12 14.4 16.3 24.7 13 Speed constant rpm/V 7290 4170 1720 1390 1040 893 795 663 587 387 14 Speed / torque gradient rpm/mNm 2280 2770 2560 2590 2620 2600 2630 2670 2750 2880 15 Mechanical time constant ms 25.3 23.8 23.3 23.3 23.3 23.4 23.5 23.4 23.5 23.9 2 16 Rotor inertia gcm 1.06 0.82 0.868 0.859 0.849 0.859 0.852 0.838 0.816 0.793 Speci cations Operating Range Comments Thermal data n rpm Continuous operation 17 Thermal resistance housing-ambient 29.8 K/W In observation of above listed thermal resistance 2.0 20000 18 Thermal resistance winding-housing 5.5 K/W (lines 17 and 18) the maximum permissible winding 110043 19 Thermal time constant winding 3.55 s temperature will be reached during continuous ope- 20 Thermal time constant motor 165 s 15000 ration at 25C ambient. 21 Ambient temperature -30+65C = Thermal limit. 22 Max. permissible winding temperature +85C 10000 Mechanical data (sleeve bearings) Short term operation 5000 23 Max. permissible speed 19000 rpm The motor may be brie y overloaded (recurring). 24 Axial play 0.05 - 0.15 mm 25 Radial play 0.012 mm 1.0 2.0 3.0 26 Max. axial load (dynamic) 0.8 N Assigned power rating 0.2 0.4 0.6 27 Max. force for press ts (static) 35 N 28 Max. radial loading, 5 mm from ange 1.4 N Mechanical data (ball bearings) 23 Max. permissible speed 19000 rpm maxon Modular System Overview on page 20 - 25 24 Axial play 0.05 - 0.15 mm Spur Gearhead 25 Radial play 0.025 mm 16 mm 26 Max. axial load (dynamic) 2.2 N 0.01 - 0.1 Nm 27 Max. force for press ts (static) 30 N Page 238 - 241 28 Max. radial loading, 5 mm from ange 7.8 N Planetary Gearhead 16 mm Other speci cations 0.06 - 0.18 Nm 29 Number of pole pairs 1 Page 242 30 Number of commutator segments 7 Planetary Gearhead 31 Weight of motor 21 g CLL = Capacitor Long Life 16 mm 0.1 - 0.6 Nm Recommended Electronics: Values listed in the table are nominal. Page 243/244 ESCON 36/2 DC Page 320 Explanation of the gures on page 71. Spindle Drive ESCON 50/5, Module 50/5 321 16 mm Notes 22 Option Page 281283 Ball bearings in place of sleeve bearings Without CLL June 2013 edition / subject to change maxon DC motor 111133 1306 DC motor.indd 113 12.06.2013 15:56:58 maxon -maxX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for maxon manufacturer: Other Similar products are found below : 110340 250521 203892 110455 403962 440557 403112 137576 118391 110048 251601 403957 367661 240987 242472 110338