100W Single Output Industrial DIN Rail Power Supply DR-100 series 8 - 5 0 7 8 ( 9 - : 7 0 7 0 0 ( 7 0 ( 0 < :* 7, < =/ & & > 3 * .. & SPECIFICATION MODEL DR-100-12 DR-100-15 DR-100-24 DC VOLTAGE 12V 15V 24V RATED CURRENT 7.5A 6.5A 4.2A CURRENT RANGE 0 ~ 7.5A 0 ~ 6.5A 0 ~ 4.2A RATED POWER 90W 97.5W 100.8W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 12 ~ 15V 15 ~ 18V 24 ~ 29V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% LINE REGULATION 1.0% 1.0% 1.0% LOAD REGULATION 1.0% 1.0% 1.0% SETUP, RISE TIME 2700ms, 80ms/230VAC 2700ms, 80ms/115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 18ms/115VAC at full load VOLTAGE RANGE 88 ~ 264VAC 124 ~ 370VDC DC input operation possible by connecting AC/L(+),AC/N(-) FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 87% 87% 89% AC CURRENT (Typ.) 3A/115VAC 1.6A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 45A/230VAC 105 ~ 135% rated output power OVERLOAD Note.6 Protection type : Constant current limiting, recovers automatically after fault condition is removed 16 ~ 20V 19 ~ 23V 30 ~ 35V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover -20 ~ +60 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Mounting: Compliance to IEC60068-2-6 SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved, design refer to EN50178 WITHSTAND VOLTAGE I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN61204-3, EN55032 Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A MTBF 486K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 100*93*56mm (W*H*D) PACKING 0.35Kg 36pcs/13.6Kg/0.89CUFT NOTE % & ( ) & *& & +, - ( ( + & & & * / 0 1 2 3 4 5 0 6 3 0 ( & ( File Name:DR-100-SPEC 2017-07-073 7.5 555 27.4 64.75 5 47 100 56 35 100W Single Output Industrial DIN Rail Power Supply DR-100 series Mechanical Specification Case No.970A Unit:mm 68 45 Terminal Pin No. Assignment 46.5 46.5 Pin No. Assignment Pin No. Assignment 1 AC/L(+) 5,6 -V 93 2 AC/N(-) 7 LED 3,4 +V 8 +V ADJ. 6 8 5 4 3 7 ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 2 1 Block Diagram RECTIFIERS RECTIFIERS POWER +V EMI I/P & & SWITCHING FILTER -V FILTER FILTER DETECTION CIRCUIT PWM O.L.P. CONTROL O.V.P. Derating Curve VS Ambient Temperature Output Derating VS Input Voltage 100 100 230V AC Input 90 80 80 70 60 110V AC Input 60 40 50 20 40 -20 010203040455060 70(VERTICAL) 88 95 100 110 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:DR-100-SPEC 2017-07-07 LOAD (%) LOAD (%)