Piezo Haptic Actuators - PowerHap Actuators with Adjustable Haptic Feedback Series/Type: 2626H023V120 Ordering code: B54101H1020A001 Date: 2019-04-17 Version: 16 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers Please fill in the table and then change the color towhit. This ensures that the table disappears (invisible) for the customer PDF. Don t change formatting when entering or pasting text in the table and don t add any cell or line in and to it Identification/Classification 1 Piezo Haptic Actuators - PowerHap (header 1 + top left bar): Identification/Classification 2 Actuators with Adjustable Haptic Feedback (header 2 + bottom left header bar): Ordering code: (top right header bar) B54101H1020A001 Series/Type: (bottom right header bar) 2626H023V120 Preliminary data (optional): Department: PPD PI AE/IE PD Date: 2019-04-17 Version: 16 Prepared by: Aditya Rajapurkar Signed by: Aditya Rajapurkar, Harald Kastl, Thomas Pirhofer TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics prior express consent is prohibited. Piezo Haptic Actuators - PowerHap B54101H1020A001 Actuators with Adjustable Haptic Feedback 2626H023V120 Features Large displacement High acceleration High force Low insertion height Fast response time Integrated sensor functionality Design RoHS-compatible PZT (lead zirconium titanate) ceramic Copper inner electrodes Dimension of ceramic body: 26 x 26 x 1 mm Titanium cymbals for displacement amplification Previously known as PowerHap 15G Contains SVHC substance 12626-81-2 General technical data Parameter Ratings Operating voltage range 20 120 V Operating temperature powered 40 C +85 C Operating temperature unpowered 40 C +125 C Maximum compressive force on actuator 25 N The operation frequency is limited by self-heating of the device. The self-heating of device should not exceed by Maximum operation frequency +30 C. At 120 V, 500 Hz, square wave conditions, a maximum allowable temperature increase of +30 C is observed after about 10 s of operation. Maximum voltage gradient 1.2 MV/s Electrical characteristics at 25 C Parameter Conditions Expected value (typ.) Capacitance C 1 kHz, 1 VRMS 4.4 F Displacement s 0 120 V, measured at cymbal end-caps 230 m Q 0 120 V Loading charge 0.8 mC PPD PI AE/IE PD 2019-04-17 Please read Cautions and warnings and Page 2 of 21 Important notes at the end of this document.