96W Single Output Industrial DIN Rail Power Supply MDR-100 series 1 - < 0 6 1 ( = - > 6 0 6 0 0 ( 6 0 >6 > ( & ( 0 :3 >* 6, : & A B 8/: & C * & .. SPECIFICATION MODEL MDR-100-12 MDR-100-24 MDR-100-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 7.5A 4A 2A CURRENT RANGE 0 ~ 7.5A 0 ~ 4A 0 ~ 2A RATED POWER 90W 96W 96W RIPPLE & NOISE (max.) Note.2 120mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE 12 ~ 15V 24 ~ 30V 48 ~ 56V VOLTAGE TOLERANCE Note.3 1.0% 1.0% 1.0% LINE REGULATION 1.0% 1.0% 1.0% LOAD REGULATION 1.0% 1.0% 1.0% SETUP, RISE TIME Note.5 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE Note.6 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF0.95/230VAC PF 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 83% 86% 87% AC CURRENT (Typ.) 1.3A/115VAC 0.8A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 60A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 15.6 ~ 18V 31.2 ~ 36V 57.6 ~ 64.8V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, auto-recovery or re-power on to recover FUNCTION DC OK SIGNAL Relay contact rating(max.): 30V/1A resistive WORKING TEMP. -10 ~ +60 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION Component : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes Mounting : Compliance to IEC60068-2-6 SAFETY STANDARDS UL508, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A EMC IMMUNITY MTBF 346K hrs min. MIL-HDBK-217F (25) 55*90*100mm (W*H*D) OTHERS DIMENSION 0.42Kg 30pcs/13.6Kg/0.82CUFT PACKING NOTE % & ( ) & *& & +, - ( ( + & & & . . * / 0 1 ( & / 2/ 3 ( & 4 5 0 -66&&& & 7 8 ( ( 6 11 & 9 : ( & 0 ( ( 0 File Name:MDR-100-SPEC 2015-10-1096W Single Output Industrial DIN Rail Power Supply MDR-100 series Mechanical Specification Case No.973A Unit:mm 35 55 100 55555 +V +V -V -V DC OK DC OK + +V ADJ NL 7.5 7.5 Install DIN rail TS35/7.5 or TS35/15 Block Diagram DC OK EMI FILTER RECTIFIERS +V PFC POWER & I/P & CIRCUIT SWITCHING -V RECTIFIERS FILTER O.C.P. O.L.P. DETECTION FG CIRCUIT PFC PWM CONTROL CONTROL O.V.P. O.T.P. DC OK Relay Contact Contact Close PSU turns on / DC OK. Contact Open PSU turns off / DC Fail. Contact Ratings (max.) 30V/1A resistive load. Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 60 60 40 50 20 40 -10 0102030405060 70(VERTICAL) 85 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:MDR-100-SPEC 2015-10-10 LOAD (%) 90 LOAD (%)