60W Single Output LED Driver NPF-60D series IP67 12. 12. 12. 12. % & ( ) * + AB1C 9. + D ) * - . / 0. 12. - . 3 4 5/ ( 5 65 + 7 3 89 9 6 4: + % 7 9 - . < ( = 12. > )( 99 9 69 9 96 96 9 65* ( File Name:NPF-60D-SPEC 2016-07-0160W Single Output LED Driver NPF-60D series SPECIFICASPECIFICATIONTION MODEL NPF-60D-12 NPF-60D-15 NPF-60D-20 NPF-60D-24 NPF-60D-30 NPF-60D-36 NPF-60D-42 NPF-60D-48 NPF-60D-54 RATED CURRENT 5A 4A 3A 2.5A 2A 1.67A 1.43A 1.25A 1.12A 60.12W 60.06W RATED POWER 60W 60W 60W 60W 60W 60W 60.48W CONSTANT CURRENT REGION 7.2 ~ 12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V OUTPUT 5.0% max. rated current CURRENT RIPPLE 5.0% CURRENT TOLERANCE SET UP TIME Note.3 500ms/115VAC, 230VAC 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.2 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF 0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC, 230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY(Typ.) 86% 87% 88% 90% 90% 90% 90% 89% 90% AC CURRENT (Typ.) 0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=270 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. NO. of PSUs on 16A 9 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.25mA / 277VAC STANDBY POWER CONSUMPTION <0.5W 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 15 ~ 17V 17.5 ~ 21V 28 ~ 34V 34 ~ 40V 41 ~ 46V 46 ~ 54V 54 ~ 60V 59 ~ 66V 23 ~ 27V OVER VOLTAGE Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) WORKING TEMP. MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, SAFETY STANDARDS IP67 approved Design refer to EN60335-1 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ( load60%) EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity Line-Line 2KV) MTBF 1016.1K hrs min. Telcordia SR-332 (Bellcore) 314.05K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 150*53*35mm (L*W*H) 0.49Kg 30pcs/15.7Kg/1.0CUFT PACKING ( / ->+ 5/ 9 NOTE . A +/+ B/ / +2 + C 1 + >-0> 6 + 5/ + < 2 9 < < 2 . + )E (3 ( (69E (3 ( (9E (%%6 E (% (* 2/- 211 % + = 9 + 9 ) + 9 .1 *9 2/- 211F &00 File Name:NPF-60D-SPEC 2016-07-01