12W Single Output LED Power Supply PLM-12 series S&E IP30 ) 1 / 012 % 012 % 012 % 012 % % & ( & ) * & + , - . % & & 03 4 4 - 52 012 & , / 03 4 % % & % , , / & % % & & & , - % % 03 4 & % % 1 6 1 7 % 8 , 03 4 & % ( & % & % % 70 9 ,:% I5 & % & ) % % & ,:& & % 03 4 &% % 44 < 03 4 1 &% % 4= < ,:% & % & % % > 4 , ) 44 < 1 4= < & File Name:PLM-12-SPEC 2018-01-1012W Single Output LED Power Supply PLM-12 series SPECIFICATION MODEL PLM-12 -350 PLM-12 -500 PLM-12 -700 PLM-12 -1050 22 ~ 36V 15 ~ 24V 11 ~ 18V 7 ~ 12V CONSTANT CURRENT REGION Note.5 RATED CURRENT 0.35A 0.5A 0.7A 1.05A NO LOAD OUTPUT VOLTAGE(max.) 42V 30V 22V 16V 12.6W 12W 12.6W 12.6W RATED POWER OUTPUT Blank type 3.6Vp-p 2.4Vp-p 2.4Vp-p 1.8Vp-p RIPPLE & NOISE (max.) Note.2 E type 5.5Vp-p 3.6Vp-p 3.6Vp-p 2.7Vp-p CURRENT ACCURACYNote.3 5.0% SETUP TIME Blank type: 500ms / 115VAC, 230VAC at full load E type: 500ms / 230VAC at full load VOLTAGE RANGE Note.4 Blank type: 110 ~ 295VAC 156 ~ 417VDC E type: 180 ~ 295VAC 254~ 417VDC FREQUENCY RANGE 47 ~ 63Hz Blank type PF0.97/115VAC,PF 0.95/230VAC,PF>0.9/277VAC(at full load)(Please refer toPower Factor Characteristi curve) POWER FACTOR E type PF0.95/230VAC,PF 0.9/277VAC (at full load)(Please refer toPower Factor Characteristi curve) Blank type THD< 20% when output loading60% at 115VAC/230VAC input and output loading 75% at 277VAC input TOTAL HARMONIC DISTORTION E type THD< 20% when output loading60% at 230VAC input and output loading 75% at 277VAC input Blank type 85% 84% 83% 81% EFFICIENCY INPUT (Typ.) E type 84% 83% 82% 78% AC CURRENT Blank type: 0.15A/115VAC 0.08A/230VAC 0.07A/277VAC E type: 0.08A/230VAC 0.07A/277VAC INRUSH CURRENT(Typ.) COLD START 15A(twidth=50s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 160 units (circuit breaker of type B) / 160 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT 0.25mA / 240VAC PROTECTION SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. WORKING TEMP. -30 ~ +50 WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY 0.06%/ (0 ~ 50) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION UL8750, CSA C22.2 No. 250.13-12(for Blank type only) ENEC EN61347-1, EN61347-2-13, EN62384, SAFETY STANDARDS GB19510.14,GB19510.1(for E type only),EAC TP TC 004,IP30 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms/500VDC / 25/ 70%RH EMC Compliance to EN55015, GB17743, GB17625.1(for E type only),EN61000-3-2 Class C(60% load) EN61000-3-3,EAC TP TC 020 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level, criteria B(surge 2KV),EAC TP TC 020 EMC IMMUNITY MTBF 808.162Khrs min. MIL-HDBK-217F (25) DIMENSION 145*38*22mm (L*W*H) OTHERS 0.126Kg 60pcs/8.6 Kg/0.48CUFT PACKING 4, * : , NOTE , A 3.B & % 4 C & & & % ,4 A 9> , , , % , 9, 2 & % ) % % , , & % D E <4 E , :% % 012 6 , D, :% & % & & % 6 , 13 & % % 6 6 13 2 % , >, 2 012 , File Name:PLM-12-SPEC 2018-01-10