25W Single Output LED Power Supply PLM-25 series S&E IP30 3 5 4 )56 % )56 % )56 % )56 % % & ( & )* +, +- . & / 0 1 2 % & & )* 1 +6 )56 & 0 4 )* % % & % 0 0 4 & % % & & & 0 1 % % )* & % % 5 7 5 8 % 9 0 )* & % ( & % & % % 8) : 0 % I+< & % & 3 % % & 0 & & % )* &% % -- = )* 5 &% % -> = 0 % & % & % % , - 0 < 3 -- = 5 -> = < & File Name:PLM-25-SPEC 2018-01-1025W Single Output LED Power Supply PLM-25 series SPECIFICATION MODEL PLM-25 -350 PLM-25 -500 PLM-25 -700 PLM-25 -1050 42 ~ 72V 30 ~ 50V 21 ~ 36V 14 ~ 24V CONSTANT CURRENT REGION Note.5 RATED CURRENT 0.35A 0.5A 0.7A 1.05A NO LOAD OUTPUT VOLTAGE(max.) 80V 56V 42V 28V 25.2W 25W 25.2W 25.2W RATED POWER OUTPUT Blank type 7.2Vp-p 5.0Vp-p 3.6Vp-p 2.4Vp-p RIPPLE & NOISE (max.) Note.2 E type 9Vp-p 7.5Vp-p 5.4Vp-p 3.6Vp-p CURRENT ACCURACYNote.3 5.0% SETUP TIME Blank type: 500ms / 115VAC, 230VAC at full load E type: 500ms / 230VAC at full load VOLTAGE RANGE Note.4 Blank type: 110 ~ 295VAC 156 ~ 417VDC E type: 180 ~ 295VAC 254~ 417VDC FREQUENCY RANGE 47 ~ 63Hz Blank type PF0.97/115VAC,PF 0.95/230VAC,PF>0.9/277VAC(at full load)(Please refer toPower Factor Characteristi curve) POWER FACTOR E type PF0.95/230VAC,PF 0.9/277VAC (at full load)(Please refer toPower Factor Characteristi curve) Blank type THD< 20% when output loading60% at 115VAC/230VAC input and output loading 75% at 277VAC input TOTAL HARMONIC DISTORTION E type THD< 20% when output loading60% at 230VAC input and output loading 75% at 277VAC input INPUT 87% 86% 86% 85% Blank type EFFICIENCY (Typ.) 86% 82% E type 85% 85% AC CURRENT Blank type: 0.3A/115VAC 0.15A/230VAC 0.12A/277VAC E type: 0.15A/230VAC 0.12A/277VAC INRUSH CURRENT(Typ.) COLD START 15A(twidth=50s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 80 units (circuit breaker of type B) / 80 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT 0.25mA / 240VAC PROTECTION Hiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUIT -30 ~ +45 WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.06%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.13-12(for Blank type only) ENEC EN61347-1, EN61347-2-13, EN62384, SAFETY STANDARDS GB19510.14,GB19510.1(for E type only),EAC TP TC 004, IP30 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms/500VDC / 25/ 70%RH EMC Compliance to EN55015, GB17743, GB17625.1(for E type only),EN61000-3-2 Class C(60% load) EN61000-3-3,EAC TP TC 020 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level, criteria B(surge 2KV),EAC TP TC 020 EMC IMMUNITY MTBF 808.162Khrs min. MIL-HDBK-217F (25) DIMENSION 145*38*22mm (L*W*H) OTHERS PACKING 0.126Kg 60pcs/8.6 Kg/0.48CUFT -0 .< 0 NOTE 0 A *2B & % - C & & & % 0- A :, 0 0 0 % 0 :0 6 & % 3 % % 0 0 & % D E =- E 0 % % )56 7 0 D0 % & % & & % 7 0 5* & % % 7 7 5* 6 % 0 ,0 6 )56 0 File Name:PLM-25-SPEC 2018-01-10