SD-100B-24 Mean Well

100W Single Output DC-DC Converter SD-100 series - % & ()% * + , - . / 01234 5 50 6 6 3 , SPECIFICATION MODEL SD-100B-5 SD-100C-5 SD-100D-5 SD-100B-12 SD-100C-12 SD-100D-12 SD-100B-24 SD-100C-24 SD-100D-24 DC VOLTAGE 5V 12V 24V RATED CURRENT 20A 8.5A 4.2A CURRENT RANGE 0 ~ 20A 0 ~ 8.5A 0 ~ 4.2A RATED POWER 100W 102W 100.8W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% LINE REGULATION 0.5% 0.3% 0.2% LOAD REGULATION 0.5% 0.3% 0.2% SETUP, RISE TIME 2s, 50ms(only D mode) at full load HOLD UP TIME (Typ.) 20ms(only D mode) at full load VOLTAGE RANGE B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~ 144VDC or 85 ~ 132VAC EFFICIENCY (Typ.) 74% 75% 76% 75% 77% 80% 78% 81% 83% DC CURRENT (Typ.) 4.8A/24V 2.4A/48V 1.8A/96V 4.8A/24V 2.4A/48V 1.8A/96V 4.8A/24V 2.4A/48V 1.8A/96V INPUT INRUSH CURRENT (Typ.) D:18A/96VDC LEAKAGE CURRENT <0.75mA/120VAC(SD-100D) 105 ~ 135% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 5.75 ~ 6.75V/10% load 16.8 ~ 20V/10% load 31.5 ~ 37.5V/10% load OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -20 ~ +85, 10 ~ 95% RH ENVIRONMENT 0.03%/ (0 ~ 50) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS IEC60950-1 CB approved by TUV (for D type only) WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 4) EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMS IMMUNITY Compliance to EN61000-4-2,3,4,6,8 ENV50204, light industry level, criteria A MTBF 356.7K hrs min.(SD-100B) 355.5K hrs min.(SD-100C) 341.9K Hrs min.(SD-100D) MIL-HDBK-217F (25) OTHERS DIMENSION 199*98*38mm (L*W*H) 0.65Kg 20pcs/13.8Kg/0.8CUFT PACKING 7 8 9 : 8 8 5*50* * 8, 8 7 NOTE 7 = > 8 )34 , , 8 7 > 5 7 17 : * 7 57 : 8 , / 8 7 () , . , 8 1< 88A1< 88 8 88 B 7 : / 8 8 , 8 8 () 7 - 8 () * C()% 8 7D , 78 7 8 File Name:SD-100-SPEC 2015-08-063.5 3.5 3-M3 100W Single Output DC-DC Converter SD-100 series Mechanical Specification Case No. 902 Unit:mm 197 1 2 3 4 5 6 7 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 57.5 120 4.5 1,2 INPUT 4,5 DC OUTPUT -V 199 3 6,7 DC OUTPUT +V FG SD-100B,C 6.5 190 Pin No. Assignment 1 DC INPUT V+ 2 DC INPUT V- SD-100D Pin No. Assignment 1,2 AC/DC INPUT 22 157 Block Diagram fosc : 83KHz RECTIFIERS EMI POWER +V I/P & FILTER SWITCHING -V FILTER FG DETECTION PWM CIRCUIT O.L.P. CONTROL O.V.P. Derating Curve Static Characteristics(SD-100D-24V) Ta=25 SD-100C,D-24 32 350 100 28 300 80 24 250 SD-100B-5,12,24 SD-100C,D-5,12 20 200 60 16 150 40 12 100 20 8 50 -10 0 10 20 30 40 50 60 (VERTICAL) 55 60 65 70 75 80 90 100 110 120 130 -10 0 45 55 (HORIZONTAL) AMBIENT TEMPERATURE () INPUT VOLTAGE (V) File Name:SD-100-SPEC 2015-08-06 4-M3 9 8.2 9.5 12 LOAD (%) 18 80 9 OUTPUT VOLTAGE (V) 9.5 18 3.5 3.5 28.5 85.5 7 38 98 OUTPUT RIPPLE (mVp-p)