SE-100-24 Mean Well

100W Single Output Switching Power Supply SE-100 series SPECIFICATION MODEL SE-100-5 SE-100-7.5 SE-100-9 SE-100-12 SE-100-15 SE-100-24 SE-100-48 DC VOLTAGE 5V 7.5V 9V 12V 15V 24V 48V RATED CURRENT 20A 13.6A 11.2A 8.5A 7A 4.5A 2.3A CURRENT RANGE 0 ~ 20A 0 ~ 13.6A 0 ~ 11.2A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.3A RATED POWER 100W 102W 100.8W 102W 105W 108W 110.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 7.13 ~ 8.3V 8.55 ~ 9.9V 11.4 ~ 13.2V 14.25 ~ 16.5V 22.8 ~ 26.4V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.5 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load HOLD UP TIME (Typ.) 30ms/230VAC 25ms/115VAC at full load VOLTAGE RANGE Note.8 85 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% 81% 81% 83% 84% 86% 86% INPUT AC CURRENT (Typ.) 2A/115VAC 1.2A/230VAC INRUSH CURRENT (Typ.) COLD START 45A LEAKAGE CURRENT <2mA / 240VAC 110 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 5.75 ~ 6.75V 8.6 ~ 10.1V 10.4 ~ 12.2V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 55.2 ~ 64.8V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed -20 ~ +60 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS Note.6 UL60950-1, CB(IEC60950-1),CCC GB4943.1:2011 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC (Note 7) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A EMC IMMUNITY MTBF 320.7Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 159*97*38mm (L*W*H) 0.55Kg 30pcs/17.5Kg/0.97CUFT PACKING NOTE File Name:SE-100-SPEC 2013-07-053.5 3-M3 100W Single Output Switching Power Supply SE-100 series Mechanical Specification Case No. 901 Unit:mm 152.5 1 2 3 4 5 6 7 +V ADJ. 4.5 24 78 Terminal Pin No. Assignment 159 Pin No. Assignment Pin No. Assignment 6.5 150 1 AC/L 4,5 DC OUTPUT -V 2 AC/N 6,7 DC OUTPUT +V 3 FG 22 117 Block Diagram fosc : 60KHz 220 110 RECTIFIERS RECTIFIERS POWER +V EMI I/P & & SWITCHING FILTER -V FILTER FILTER DETECTION FG CIRCUIT PWM O.L.P. CONTROL O.V.P. Derating Curve Static Characteristics 100 100 Others 90 80 80 60 70 50 5V 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) 85 100 115 120 125 130 132 176 200 220 240 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:SE-100-SPEC 2013-07-05 3.5 M 2- 3 LOAD (%) 8.2 9.5 9 18.5 LOAD (%) 65 18 9 3.5 3.5 28.5 84.5 7 38 97