100W Single Output with PFC Function SP-100 series SPECIFICATION MODEL SP-100-3.3 SP-100-5 SP-100-7.5 SP-100-12 SP-100-13.5 SP-100-15 SP-100-24 SP-100-27 SP-100-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 20A 20A 13.5A 8.5A 7.5A 6.7A 4.2A 3.8A 2.1A CURRENT RANGE 0 ~ 20A 0 ~ 20A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7.5A 0 ~ 6.7A 0 ~ 4.2A 0 ~ 3.8A 0 ~ 2.1A RATED POWER 66W 100W 101.25W 102W 101.25W 100.5W 100.8W 102.6W 100.8W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p OUTPUT VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 600ms, 30ms at full load HOLD UP TIME (Typ.) 20ms at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC PF>0.97/115VAC at full load INPUT EFFICIENCY (Typ.) 75% 79% 82% 82.5% 83% 84% 87% 86% 84% AC CURRENT (Typ.) 1.7A/115VAC 0.8A/230VAC INRUSH CURRENT (Typ.) COLD START 35A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.23V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover FUNCTION REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -20 ~ +85, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.05%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55032 (CISPR32) Class B,EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204, EN55024, light industry level, criteria A 211.3K hrs min. MIL-HDBK-217F (25) MTBF DIMENSION 179*99*45mm (L*W*H) OTHERS 0.66Kg 20pcs/14.3Kg/1.17CUFT PACKING NOTE File Name:SP-100-SPEC 2017-07-14100W Single Output with PFC Function SP-100 series Mechanical Specification Case No. 915A Unit:mm 179 20 25 123 25 117 60 65 CN1 1 R.C. 2 +V ADJ. LED 7 6 5 2-M4 L=5mm 4 5-M3 L=3mm 3 2 1 Terminal Pin No. Assignment 15 Pin No. Assignment Pin No. Assignment 142 1 AC/L 4,5 DC OUTPUT -V 25 2 AC/N 6,7 DC OUTPUT +V 3 FG 12 max. Remote ON/OFF(CN1): JST S2B-XH or equivalent(optional) Pin No. Assignment Mating Housing Terminal 1 RC+ JST XHP JST SXH-001T-P0.6 or equivalent or equivalent 2 RC- 6-M4 L=6mm PFC fosc : 67KHz Block Diagram PWM fosc : 134KHz EMI FILTER RECTIFIERS PFC POWER +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER CONSTANT CURRENT & FG DETECTION PWM & PFC CIRCUIT ACTIVE CONTROL START O.V.P. CIRCUIT REMOTE CN1 CONTROL Derating Curve Output Derating VS Input Voltage SP-100-12~48 100 100 SP-100-3.3~7.5 (With 17.8CFM FAN) 90 80 80 SP-100-3.3 SP-100-5 70 60 SP-100-7.5 60 40 50 20 40 -10 0 10 20 40 50 55 60 (HORIZONTAL) 85 100 115 135 155 230 264 -10 0 10 20 45 55 60 70 (VERTICAL) AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:SP-100-SPEC 2017-07-14 8 9.5 LOAD (%) 16 25 49.5 12.5 25 38 51 10 79 45 LOAD (%) 99 119