350W ATX with 24V industrial PC Power Supply YP-350J-AA Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage Power good and fail signal FAN speed control function Power ON-OFF switch with indicator Forced air cooling by built-in DC fan 100% full load burn-in test Approvals: UL / CUL / TUV / CB / FCC / CE 2 years warranty SPECIFICATION ORDER NO. YP-350J-AA SAFETY MODEL NO. YP-350J CHANNEL CH1 CH2 CH3 CH4 CH5 CH6 STANDBY DC VOLTAGE 3.3V 5V 12V 24V -5V -12V 5VSB MINIMUM CURRENT 0.3A 0.1A 0A 0A 0A 0A 0A RATED CURRENT 9A 15A 9A 5A 0.3A 0.8A 2.0A MAXIMUM CURRENT 14A 21A 15A 5A 0.3A 0.8A 2.0A OUTPUT 135W max. For +5V and +3.3V output COMBINE LOAD 210W max. For +5V, +3.3V and +12V output RATED POWER (max.) 350W continue load RIPPLE & NOISE (max.) Note.2 50mVp-p 50mVp-p 120mVp-p 150mVp-p 100mVp-p 120mVp-p 50mVp-p LINE REGULATION 1.0% 1.0% 1.0% 1.0% 2.0% 2.0% 1.0% LOAD REGULATION Note.3 5.0% 5.0% -2.0 ~ +8.0% -2.0 ~ +8.0% 5.0% 10% 5.0% HOLD UP TIME 10ms min. at full load (Rated current) VOLTAGE RANGE 100 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF>0.95 230VAC PF>0.98 115VAC INPUT EFFICIENCY (Typ.) 70% AC CURRENT 8.0A / 115VAC 4.5A / 230VAC INRUSH CURRENT (max.) 40A / 115VAC 80A / 230VAC LEAKAGE CURRENT 3.5mA / 240VAC 105 ~ 180% rated output power OVERLOAD Protection type : Shut down o/p voltage, re-power on to recover 110% ~ 130% of rated voltage for +3.3V, +5V and +12V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover All output equipped with short circuit SHORT CIRCUIT Protection type : Shut down o/p voltage, re-power on to recover POWER GOOD SIGNAL The TTL compatible signal out with 100ms to 500ms delay after power set up FUNCTION POWER FAIL SIGNAL The TTL compatible signal will go down at least 1ms before +5V below 4.75V PS-ON INPUT SIGNAL Power on: PS-ON =Lo or<0.8 Power off: PS-ON = H or>2 -10 ~ +40 WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.05% / (0 ~ 50 ) VIBRATION 10 ~ 200Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P: 50M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) class B, FCC part 15 Class B (Note 4) Compliance to EN61000-3-2,-3 HARMONIC CURRENT EMS IMMUNITY Compliance to EN61000-4-2,3,4, 5,6,8,11, light industry level, criteria A MTBF 100K hrs min. ATX main power connector * 1ea +12V power connector * 1ea Auxiliary power connector * 1ea CONNECTOR Peripheral power connector * 5 ea Floppy drive power connector * 2 ea OTHERS Forced air ventilation by 8cmx8 ball bearing DC fan COOLING DIMENSION 171*150*86mm (L*W*H) 1.6Kg 12pcs / 20Kg / CARTON PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Line regulation is measured from low line to high line at rated load. 4. Load regulation is measured from 20% to 100% max. Load. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name: YP-350J-AA-SPEC 2010-02-25350W ATX with 24V industrial PC Power Supply YP-350J-AA Mechanical Specification Unit: mm 150 150 114 AC INPUT CONNECTOR POWER SWICH OP WIRE HARNESS AC OUTPUT CONNECTOR NO.6-32UNC-2B THREADED 138 HOLE(4X) ( D ) ( D ) ( D ) ( E ) ( D ) ( D ) ( E ) ( B ) ( C ) (A)ATX main power connector (B)+12V power connector Type: MOLEX 39-01-2200 or equivalent Type: MOLEX 39-01-2040 or equivalent (C)Auxiliary power connector (D)Peripheral connector Type: MOLEX 39-01-2120 or equivalent Type: MOLEX 8981-04P or equivalent (E)Floppy drive connector Type: AMP 171822-4 or equivalent ( A ) File Name:YP-350J-AA-SPEC 2010-02-25 WIRE OUTPUT OF CASE +5VDC +12VDC +5VDC +5V SB -5VDC PWR-OK GND GND GND +5VDC GND GND PS-ON +5VDC GND GND -12VDC +3.3VDC +3.3VDC +3.3VDC PIN11 PIN1 L=400mm 50mm 4 +5VDC COM 3 2 COM +12VDC 1 L=150mm L=500mm 50mm +5VDC 4 COM 3 COM 2 +12VDC 1 L=150mm +5VDC 4 COM 3 86 COM 2 +12VDC 1 L=150mm +5VDC 1 2 COM COM 3 4 +12VDC 4 +5VDC COM 3 COM 2 +12VDC 1 L=150mm L=300mm 20mm +5VDC 4 COM 3 COM 2 74 +12VDC 1 L=150mm +5VDC 1 COM 2 COM 3 4 +12VDC COM +12VDC 4 2 3 1 +12VDC COM L=400mm 50mm +5V +5V PIN12 PIN6 ND GND G 24V 24V GND GND +12V +12V L=400mm 50mm PIN7 PIN1 64 +5VSB GND