1108811319 Metz

Page 1/4 Data sheet Part number BMT-DI10 1108811319 BACnet module with digital inputs 2016-11-11 Illustrations Principle diagram Wiring C1 A1/+24 V 10 9876 C1 C1 24 V A2 /GND 1 2 BUS B+ A1 24 V AC/DC A1 3 BUS A- A2 GND A2 4 5 B+ BUS B+ B+ 6 A- BUS A- A- 7 8 9 10 +24 V GND 132 4 5 C1 J Open Energy Management Equipment 34TZ Use copper conductors only Product description The BACnet MS/TP module with 10 digital inputs was The module is addressed and the bitrate is set by means of developed for decentralized switching tasks. two address switches on the front. It is suitable for detecting potential-free switch states, for Suitable for decentralized mounting on DIN TH35 rail example electrical limit switches on vent valves or auxiliary according to IEC 60715 in electrical distribution cabinets. contacts of power contactors. The inputs can be used as contact or voltage inputs. The inputs can be scanned by means of standard objects via a BACnet client. METZ CONNECT GmbH Im Tal 2 78176 Blumberg Germany Ph. +49 7702 533-0 Fax +49 7702 533-433 Additional documentation see www.metz-connect.com BACnet MS/TP on RS-485 RISC - CPU 2014 METZ CONNECT - Subject to modifications Page 2/4 Data sheet Part number BMT-DI10 1108811319 BACnet module with digital inputs 2016-11-11 Technical data Approvals C-UL Certification Open Energy Management Equipment 34TZ BACnet interface Protocol BACnet MS/TP Address range 00 to F9 Transmission rate 9600 to 115200 Bit/s, factory setting 9600 Bit/s Cabling RS485 two wire bus with potential equalization in bus or line topology terminate with 120 Ohm Supply Operating voltage 24 V AC/DC 10 % (SELV) Current consumption 85 mA (AC) / 75 mA (DC) Relative duty cycle 100 % Inputs Digital inputs 10 Voltage input 30 V DC High signal reognition >7 V AC/DC Housing Dimensions WxHxD 1.378 x 2.728 x 2.362 in. (35 x 69.3 x 60 mm) Weight 83 g Mounting position any Mounting on TH35 rail per IEC 60715 Side-by-side mounting Without space The maximum quantity of BACnet modules connected side-by-side is limited to 15 or to a maximum power consumption of 2 Amps (AC or DC) per connection to the power supply. For any similar block of additional modules a separate connection to the power supply is necessary. Material Housing polyamide 6.6 V0 Terminal blocks polyamide 6.6 V0 Cover polycarbonate Type of protection (IEC 60529) Housing IP40 Terminal blocks IP20 METZ CONNECT GmbH Im Tal 2 78176 Blumberg Germany Ph. +49 7702 533-0 Fax +49 7702 533-433 Additional documentation see www.metz-connect.com 2014 METZ CONNECT - Subject to modifications