1N4614-1 1N4627-1e3,
1N4099-1 1N4135-1e3
Qualified Levels:
500 mW Metallurgically Bonded
JAN, JANTX,
Available on
Glass Zener Diodes JANTXV and JANS
commercial
versions
Qualified per MIL-PRF-19500/435
DESCRIPTION
The 1N4099-1 through 1N4135-1 and 1N4614-1 through 1N4627-1 series are 500 mW, Zener
voltage regulators in the axial-leaded, glass DO-35 package. Voltages from 1.8 to 100V in
5%, 2%, and 1% tolerances are available. They are constructed with an internal metallurgical
bond and are mil-qualified up to the JANS level for high reliability applications.
Important: For the latest information, visit our website 1N4614-1 1N4627-1e3,
1N4099-1 1N4135-1e3
MECHANICAL and PACKAGING
CASE: Hermetically sealed axial-lead glass DO-35 (DO-204AH) style package.
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin (on commercial grade only) plating. Solderable per MIL-STD-750,
method 2026.
POLARITY: Cathode indicated by band. The diode is to be operated with the banded end positive with respect to the opposite
end for Zener regulation.
MARKING: Part number.
TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 0.2 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
JAN 1N4099 C -1 e3
Reliability Level RoHS Compliance
JAN = JAN level e3 = RoHS compliant (available
JANTX = JANTX level on commercial grade only)
JANTXV = JANTXV level Blank = non-RoHS compliant
JANS = JANS level
Blank = Commercial
Metallurgically Bonded
JEDEC type number
(See Electrical Characteristics
table)
Zener Voltage Tolerance
Blank = 5%
C = 2%
D = 1%
SYMBOLS & DEFINITIONS
Symbol Definition
Temperature Coefficient of Regulator Voltage: The change in regulator voltage divided by the change in temperature
VZ
that caused it expressed in %/C or mV/C.
I Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature.
R
IZ, IZT, IZK Regulator Current: The dc regulator current (IZ), at a specified test point (IZT), near breakdown knee (IZK).
I Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
ZM
N Noise Density: The noise generated over a specified frequency bandwidth usually specified in terms of mV/ Hz.
D
V Reverse Voltage: The reverse voltage dc value, no alternating component.
R
V Zener Voltage: The Zener voltage the device will exhibit at a specified current (I ) in its breakdown region.
Z Z
Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a
Z or Z
ZT ZK
specified rms current modulation (typically 10% of I or I ) and superimposed on I or I respectively.
ZT ZK ZT ZK
T4-LDS-0245-2, Rev. 1 (5/31/13) 2013 Microsemi Corporation Page 2 of 5