WWW.Microsemi .COM 1N5985 1N6031-1, e3 1N5985 thru 1N6031-1, e3 DO-35 Axial-Leaded 500 mW Zener Diodes SCOTTSDALE DIVISION DESCRIPTION APPEARANCE The popular 1N5985 thru 1N6031 series of 0.5 watt Zener Voltage Regulators DO-35 provides a selection from 2.4 to 200 volts in standard 5% or 10% tolerances as (DO-204AH) well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-35 Zeners are also available in various military screening levels by adding a prefix identifier as described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications. IMPORTANT: For the most current data, consult MICROSEMIs website: WWW.Microsemi .COM 1N5985 1N6031-1, e3 1N5985 thru 1N6031-1, e3 DO-35 Axial-Leaded 500 mW Zener Diodes SCOTTSDALE DIVISION o *ELECTRICAL CHARACTERISTICS 30 C Lead Temperature. Lead Length 3/8. Max. Zener Impedance Typical (Note 1) Max. Reverse Leakage Current Temp. Nominal Max. DC Coeff. Zener Zener of Zener Voltage Test Z I Z I = 0.25 ma I V ZT ZT ZK ZK R R Current Voltage Current JEDEC V I OHMS OHMS A Volts Z ZT I I Type Volts ZT B,C,D A, Non- B,C,D A, Non- B,C,D A, Non- B,C,D A, Non- ZM VZ o Number (Note 2) mA Suffix Suffix Suffix Suffix Suffix Suffix Suffix Suffix (Note 3) %/ C 1N5985 2.4 5.0 100 110 1800 2000 100 100 1.0 0.5 208 -0.09 1N5986 2.7 5.0 100 110 1900 2200 75 100 1.0 0.5 185 -0.075 1N5987 3.0 5.0 95 100 2000 2300 50 100 1.0 0.5 167 -0.07 1N5988 3.3 5.0 95 100 2200 2400 25 75 1.0 0.5 152 -0.06 1N5989 3.6 5.0 90 95 2300 2500 15 50 1.0 0.5 139 -0.055 1N5990 3.9 5.0 90 95 2400 2500 10 25 1.0 1.0 128 -0.045 1N5991 4.3 5.0 88 90 2500 2500 5.0 15 1.0 1.0 116 -0.01 1N5992 4.7 5.0 70 90 2200 2500 3.0 10 1.5 1.0 106 +0.01 1N5993 5.1 5.0 50 88 2050 2500 2.0 5.0 2.0 1.0 98 +0.025 1N5994 5.6 5.0 25 70 1800 2200 2.0 3.0 3.0 1.5 89 +0.035 1N5995 6.2 5.0 10 50 1300 2050 1.0 2.0 4.0 2.0 81 +0.04 1N5996 6.8 5.0 8.0 25 750 1800 1.0 2.0 5.2 3.0 74 +0.044 1N5997 7.5 5.0 7.0 10 600 1300 0.5 1.0 6.0 4.0 67 +0.051 1N5998 8.2 5.0 7.0 15 600 750 0.5 1.0 6.5 5.2 61 +0.055 1N5999 9.1 5.0 10 18 600 600 0.1 0.5 7.0 6.0 55 +0.061 1N6000 10 5.0 15 22 600 600 0.1 0.5 8.0 6.5 50 +0.065 1N6001 11 5.0 18 25 600 600 0.1 0.1 8.4 7.0 45 +0.068 1N6002 12 5.0 22 32 600 600 0.1 0.1 9.1 8.0 42 +0.073 1N6003 13 5.0 25 36 600 600 0.1 0.1 9.9 8.4 38 +0.075 1N6004 15 5.0 32 42 600 600 0.1 0.1 11 9.1 33 +0.079 1N6005 16 5.0 36 48 600 600 0.1 0.1 12 9.9 31 +.080 1N6006 18 5.0 42 55 600 600 0.1 0.1 14 11 28 +0.083 1N6007 20 5.0 48 62 600 600 0.1 0.1 15 12 25 +0.085 1N6008 22 5.0 55 70 600 600 0.1 0.1 17 14 23 +0.087 1N6009 24 5.0 62 78 600 600 0.1 0.1 18 15 21 +0.090 1N6010 27 5.0 70 88 600 700 0.1 0.1 21 17 19 +0.091 1N6011 30 5.0 78 95 600 700 0.1 0.1 23 18 17 +0.093 1N6012 33 5.0 88 110 700 800 0.1 0.1 25 21 15 +0.094 1N6013 36 5.0 95 130 700 900 0.1 0.1 27 23 14 +0.094 1N6014 39 2.0 130 170 800 1000 0.1 0.1 30 25 13 +0.095 1N6015 43 2.0 150 180 900 1100 0.1 0.1 33 27 12 +0.095 1N6016 47 2.0 170 200 1000 1300 0.1 0.1 36 30 11 +0.096 1N6017 51 2.0 180 225 1300 1400 0.1 0.1 39 33 9.8 +0.096 1N6018 56 2.0 200 240 1400 1600 0.1 0.1 43 36 8.9 +0.096 1N6019 62 2.0 225 265 1400 1700 0.1 0.1 47 39 8.0 +0.097 1N6020 68 2.0 240 280 1600 2000 0.1 0.1 52 43 7.4 +0.097 1N6021 75 2.0 265 300 1700 2300 0.1 0.1 56 47 6.7 +0.098 1N6022 82 2.0 280 350 2000 2600 0.1 0.1 62 52 6.1 +0.098 1N6023 91 2.0 300 400 2300 3000 0.1 0.1 69 56 5.5 +0.099 1N6024 100 1.0 500 800 2600 4000 0.1 0.1 76 62 5.0 +0.110 1N6025 110 1.0 650 950 3000 4500 0.1 0.1 84 69 4.5 +0.110 1N6026 120 1.0 800 1250 4000 5000 0.1 0.1 91 76 4.2 +0.110 1N6027 130 1.0 950 1400 4500 5500 0.1 0.1 99 84 3.8 +0.110 1N6028 150 1.0 1250 1700 5000 6000 0.1 0.1 114 91 3.3 +0.110 1N6029 160 1.0 1400 2000 5500 7000 0.1 0.1 122 99 3.1 +0.110 1N6030 180 1.0 1700 2350 6000 8000 0.1 0.1 137 114 2.8 +0.110 1N6031 200 1.0 2000 2700 7000 9000 0.1 0.1 152 122 2.5 +0.110 *Indicates JEDEC Registered Data. The type number listed indicates a 20% tolerance. For 10% tolerance, add suffix A for 5% tolerance, add suffix B for 2% tolerance add suffix C for 1% tolerance, add suffix D. NOTES: 1. Zener Impedance is derived from the 1 kHz ac voltage which results when an ac current having an rms value equal to 10% of dc zener current (I or I ) is superimposed on I or I . See MicroNote 202 for dynamic impedance variation with other ZT ZK ZT ZK operating currents. 2. Voltage Measurements to be performed 20 seconds after application of the dc test current. 3. The maximum zener current I shown is for the nominal voltages. The following formula can be used to determine the worst ZM P case current for any tolerance device: V ZM I = ZM Where V is the high end of the voltage tolerance specified and P is the rated power of the device. ZM Copyright 2006 Microsemi Page 2 5-09-2006 REV B Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503