ATDS1500PC Microchip

ProChip Designer Atmel Software Suite OVERVIEW Description The Atmel ProChip Designer v5.0.1 is a fully featured EDA software suite incorporating state-of-the-art synthesis and simulation tools from Mentor Graphics with the Atmel user-friendly interface and design navigator, as well as, powerful fitter technologies. The combination of these tools enables CPLD designers to achieve the highest possible logic utilization from the Atmel (1) ATF15xxAS/ASL/ASV/ASVL/BE series CPLDs with Logic Doubling features. Through all of the software components available within ProChip, the following features are supported: Design Entry and Synthesis VHDL Verilog (2) CUPL (2) Schematic Simulation (3) VHDL Functional and Timing Simulation (3) Verilog Functional and Timing Simulation (2) CUPL Functional Simulation Device (1) ATF15xxBE: 1.8V ultra-low-power CPLD ATF15xxAS/ASL: 5.0V standard and low-power CPLD ATF15xxASV/ASVL: 3.0V standard and low-power CPLD Programming JTAG ISP 1. The ATF15xxBE is not recommended for new design. 2. Optional and requires Altium software. 3. Optional and requires a separate license from Mentor Graphics. Atmel-3628D-PLD-ProChip-Designer-Software-Suite-Overview 052016Features ProChip Designer seamlessly integrates the following software components into one user-friendly Integrated Development Environment (IDE) for the ATF15xx CPLDs: ProChip Designer Software Components Precision RTL Synthesis VHDL and Verilog synthesis supports from Mentor Graphics . (Atmel-OEM version) ModelSim (Optional*) VHDL and Verilog simulation supports from Mentor Graphics. (Atmel-OEM version) *Requires a separate Mentor Graphics license. FIT15xx Fitting support for the ATF15xx CPLDs from Atmel. HDL Planner VHDL and Verilog design entry and text editing supports from Atmel. ATMISP JTAG In-System programming (ISP) support from Atmel. The following optional third-party software from Altium can be installed separately and can be used independently or in conjunction with ProChip Designer for schematic and CUPL designs: Optional Third-party Software Protel Design Explorer 99SE Schematic and CUPL design entries, synthesis, and functional simulation supports (Atmel Edition) from Altium. 2 ProChip Designer Software Suite Overview Atmel-3628D-PLD-ProChip-Designer-Software-Suite-Overview 052016