JANTX1N6118AUS Microchip

1N6103AUS 1N6137AUS Qualified Levels: Voidless Hermetically Sealed Surface Mount JAN, JANTX, JANTXV Available on Bidirectional Transient Voltage Suppressors and JANS* commercial Qualified to MIL-PRF-19500/516 versions DESCRIPTION This surface mount series of industry recognized voidless, hermetically sealed, bidirectional Transient Voltage Suppressors (TVS) designs is military qualified to MIL-PRF-19500/516 and is ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working Peak Standoff Voltage selection from 5.7 to 152 Volts with a 500 W rating for a 10/1000 s pulse. They are very robust in hard-glass construction and internal Category 1 metallurgical bonds. These are also available as both a non-suffix part and an A version providing different voltage tolerances as described in the nomenclature section. These devices are also available in axial- B or SQ-MELF leaded packages for thru-hole mounting. Package Also available in: Important: For the latest information, visit our website 1N6103AUS 1N6137AUS MECHANICAL and PACKAGING CASE: Hermetically sealed voidless hard glass with tungsten slugs. TERMINALS: Tin/lead plate over copper. RoHS compliant matte-tin is available on commercial grade only. MARKING: None. POLARITY: No polarity marking for these bidirectional TVSs. TAPE & REEL option: Standard per EIA-481-B. Consult factory for quantities. WEIGHT: Approximately 539 milligrams. See Package Dimensions on last page. PART NOMENCLATURE Applicable to entire series: JAN 1N6103 A US (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS compliant (available on commercial grade only) JANTX = JANTX Level JANTXV = JANTXV Level Blank = non-RoHS compliant Blank = commercial Surface Mount Package JEDEC type number See Electrical Characteristics Voltage Tolerance table A = Standard Blank =5% higher V , 5% lower C min. V and 5% lower I (BR) PP Applicable to 1N6103(A)US 1N6118(A)US only: JANS 1N6103 A US Reliability Level Surface Mount Package JANS = JANS Level Voltage Tolerance JEDEC type number A = Standard See Electrical Characteristics Blank =5% higher V , 5% lower C table min. V and 5% lower I (BR) PP Applicable to 1N6119(A)US 1N6137(A)US only: MSP 1N6119 A US (e3) Reliability Level RoHS Compliance MSP (reference JANS) e3 = RoHS compliant Blank = non-RoHS compliant JEDEC type number See Electrical Characteristics Surface Mount Package table Voltage Tolerance A = Standard Blank =5% higher V , 5% lower C min. V and 5% lower I (BR) PP T4-LDS-0277-1, Rev. 1 (121354) 2013 Microsemi Corporation Page 2 of 6