MIC2033 High-Accuracy, High-Side, Fixed Current-Limit Power Switch Features General Description 5% Current-Limit Accuracy The MIC2033 is a high-side MOSFET power distribution switch that provides increased system Input Supply Range from 2.5V to 5.5V reliability, utilizing 5% current-limit accuracy. Low Quiescent Current: 100 A Typical (Switch ON) The MIC2033 has an operating input voltage range from 2.5V to 5.5V, is internally current-limited and has 75 m Typical R at 5V DS(ON) thermal shutdown to protect the device and system. Current-Limit Options: 0.5A, 0.8A, 1A, and 1.2A The MIC2033 is offered with either active-high or Soft-Start Control via an External Capacitor active-low logic level enable input controls, has an Undervoltage Lockout (UVLO) open-drain fault status output flag with a built-in 32 ms Fast Response Time (10 s) to Short-Circuit delay that asserts low during over current or thermal Loads shutdown conditions. Fault Status Output Flag The MIC2033 is available in several different fixed Logic Controlled Enable (Active-High, Active-Low) current-limit options: 0.5A, 0.8A, 1A, and 1.2A. A capacitor-adjustable soft-start circuit minimizes inrush Thermal Shutdown current in applications where high capacitive loads are Pin Compatible with MIC2005 used. 6-Pin 2 mm x 2 mm UDFN and 6-Pin SOT-23 The MIC2033 is offered in both 6-pin SOT-23 and 6-pin Packages 2 mm x 2 mm UDFN packages. The MIC2033 has an Junction Temperature Range from 40C to operating junction temperature range of 40C to +125C +125C. Applications USB Peripherals and USB 2.0/3.0-Compatible DTV/STB Notebooks and Consumer Electronics General Purpose Power Distribution Package Types MIC2033 MIC2033 SOT-23-6 (M6) 2x2 UDFN (MT) (Note 1) VIN 1 6 VOUT VOUT 1 6 VIN GND 2 5 CSLEW CSLEW 2 EP 5 GND EN EN 3 4 FAULT/ FAULT/ 3 4 Note 1: UDFN = Pin 1 identifier. 2018 - 2022 Microchip Technology Inc. and its subsidiaries. DS20005539C-page 1 3 MIC2033 Typical Application Circuit MIC2033 2x2 UDFN V 6 1 V IN OUT VIN VOUT 5V 5.0V/1A C1 R1 4 47F 10K C2 EN 6.3V C3 100F 0.1F 6.3V FAULT/ 2 5 CSLEW GND Functional Block Diagram POWER FET VIN VOUT SENSE FET THERMAL UVLO SENSOR CURRENT DELAY LIMIT FAULT/ EN CONTROL REFERENCE SLEW RATE GND CSLEW CONTROL DS20005539C-page 2 2018 - 2022 Microchip Technology Inc. and its subsidiaries.