MP6KE6.8A MP6KE200CA (e3) Screening in reference to Available 600 Watt Transient Voltage Suppressor MIL-PRF-19500 available DESCRIPTION This screened MP6KE6.8A MP6KE200CA series provides a variety of enhanced reliability choices. Uni- and bi- directional options, as well RoHS compliant versions, are available. These devices have the ability to clamp dangerous high voltage transients such as secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4. Important: For the latest information, visit our website MP6KE6.8A MP6KE200CA (e3) MAXIMUM RATINGS 25 C unless otherwise stated Parameters/Test Conditions Symbol Value Unit o Junction and Storage Temperature T and -65 to +150 C J T STG o Thermal Resistance, Junction to Lead 3/8 inch (10 mm) R 25 C/W JL lead length from body (1) o Thermal Resistance, Junction to Ambient R 85 C/W JA (2) Peak Pulse Power Dissipation 10/1000 s P 600 W PP Steady-State Power Dissipation T = 25 C 3/8 inch (10 P 5 W L D (1) mm) from body 1.47 T (0 volts to V min, theoretical) Unidirectional < 100 ps clamping ( BR) Bidirectional < 5 ns (3) Forward Voltage V 3.5 V F o Solder Temperature 10 s 260 C 2 Notes: 1. When mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 4). 3. At 100 amp peak impulse of 8.3 ms half-sine wave (unidirectional only). MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026. MARKING: Part number POLARITY: Cathode indicated by band. Bidirectional not marked. TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities. WEIGHT: Approximately 0.7 grams See Package Dimensions on last page. PART NOMENCLATURE M P6K E 6.8 C A (e3) Reliability Level* RoHS Compliance M e3 = RoHS compliant MA Blank = non-RoHS compliant MX MXL 5% Voltage Tolerance (*see Hirel Non-Hermetic Product Portfolio) Polarity C = Bi-directional Point 6 kilowatt Blank = Unidirectional Encapsulated Plastic Working Standoff Voltage Package Rating RF01007, Rev. B (9/17/13) 2013 Microsemi Corporation Page 2 of 6