TC1271AMVRCTR

TC1271A TC1271A TC1270A TC1270A TC1270AN TC1270AN TC1270A/70AN/71A Voltage Supervisor with Manual Reset Input Features Package Types Precision Voltage Monitor SOT-143 SOT-143 - 2.63V, 2.93V, 3.08V, 4.38V and 4.63V Trip V V V V 1 4 1 4 DD DD SS SS Points (Typical) Manual Reset Input Reset Time-Out Delay: MR 2 3 MR RST 2 3 RST - Standard: 280 ms (Typical) - Optional: 2.19 ms, and 35 ms (Typical) SOT-23-5 SOT-23-5 Power Consumption 15 A max No glitches on outputs during power-up V NC NC 1 5 V 1 5 SS SS Active Low Output Options: V V 2 2 DD DD - Push-Pull Output and Open-Drain Output RST Active High Output Option: MR 3 4 MR 3 4 RST - Push-Pull Output Replacement for (Specification compatible with): Functional Block Diagram - TC1270, TC1271 - TCM811, TCM812 RST Voltage Reset V Fully Static Design DD PP Detector Generator (TC1271A) Low-Voltage Operation (1.0V) Circuitry and Delay RST ESD Protection: Timer PP (TC1270A) - 4 kV Human Body Model (HBM) (2.19 ms, 35 ms, - 400V Machine Model (MM) RST OD 280 ms) (TC1270AN) Extended (E) Temperature Range: -40C to +125C 18.5 k Package Options: MR - 4-Lead SOT-143 Glitch Filter - 5-Lead SOT-23 - Pb-free Device Pass Automotive AEC-Q100 Reliability Testing Device Features Output Device Packages Comment Active Type Level (2) SOT-143 , Replaces TC1270 and TC1270A Push-Pull Low SOT-23-5 TCM811 4.63, 4.38, (2) New Option 2.19, 35, 1.0V to -40C to SOT-143 , TC1270AN Open-Drain Low 3.08, 2.93, (1) 280 5.5V +125C (4) SOT-23-5 2.63 (2) SOT-143 , Replaces TC1271 and TC1271A Push-Pull High SOT-23-5 TCM812 Note 1: The 280 ms Reset delay time-out is compatible with the TC1270, TC1271, TCM811 and TCM812 devices. 2: The SOT-143 package is compatible with the TC1270, TC1271, TCM811 and TCM812 devices. 3: Custom Reset trip points and Reset delays available, contact your local Microchip sales office. 4: The TC1270/1 and TCM811/12 1.75V trip point option is not supported. 2007-2021 Microchip Technology Inc. DS20002035E-page 1 Reset Delay (3) (ms) (Typ) Reset Trip (3) Point (V) Voltage Range (V) Temperature Range Output DriverTC1270A/70AN/71A Notice: Stresses above those listed under Absolute 1.0 ELECTRICAL Maximum Ratings may cause permanent damage to a CHARACTERISTICS device. The absolute maximum values are merely Absolute Maximum Ratings stress ratings functional operation of a device at those, or any other conditions above those indicated in Supply Voltage (V to V ) ...............................+7.0V DD SS the operational listing of these specifications, is not ..............................................10 mA Input Current, V DD implied. Exposure to absolute maximum rating Output Current, RESET, Reset...........................10 mA conditions for extended periods may affect device Voltage on all inputs and outputs reliability. w.r.t. V ............................-0.6V to (V + 1.0V) SS DD Storage Temperature Range..............-65C to +150C Operating Temperature Range...........-40C to +125C Maximum Junction Temperature, T ................... 150C S ESD protection on all pins Human Body Model 4kV Machine Model 400V ELECTRICAL CHARACTERISTICS Electrical Characteristics: Unless otherwise noted, V = 5V for L/M versions, V = 3.3V for T/S versions, DD DD V = 3V for R version, T = -40C to +125C. Typical values are at T = +25C. DD A A (1) Max. Units Test Conditions Parameter Sym. Min. Typ. Operating Voltage Range V 1.0 5.5 V DD Supply Current I 7 15 AV > V , for L/M/R/S/T, DD DD TRIP V = 5.5V DD 4.75 10 A V > V , for R/S/T, V = 3.6V DD TRIP DD 10 15 A V < V , for L/M/R/S/T DD TRIP Reset Trip Point V 4.54 4.63 4.72 V TC127xAL: T = +25C TRIP A (3) Threshold 4.50 4.75 V T = 40C to +125C A 4.30 4.38 4.46 V TC127xAM: T = +25C A 4.25 4.50 V T = 40C to +125C A 3.03 3.08 3.14 V TC127xAT: T = +25C A 3.00 3.15 V T = 40C to +125C A 2.88 2.93 2.98 V TC127xAS: T = +25C A 2.85 3.00 V T = 40C to +125C A (5) 2.72 2.77 2.82 V TC127xA: T = +25C A 2.70 2.85 V T = 40C to +125C A 2.58 2.63 2.68 V TC127xAR: T = +25C A 2.55 2.70 V T = 40C to +125C A Note 1: Data in the Typical (Typ.) column is at 5V, +25C, unless otherwise stated. 2: RST output for TC1270A and TC1270AN, RST output for TC1271A. 3: TC127XA refers to the TC1270A, TC1270AN or TC1271A device. to V window. 4: Hysteresis is within the V TRIP(MIN) TRIP(MAX) 5: Custom-ordered voltage trip point. Minimum order volume requirement. 6: This specification allows this device to be used in PIC microcontroller applications that require the In-Circuit Serial Programming (ICSP) feature (see device-specific programming specifications for voltage requirements). The total time that the RST pin can be above the maximum device operational voltage (5.5V) is 100s. Current into the RST pin should be limited to 2 mA. It is recommended that the device operational temperature be maintained between 0C to +70C (+25C preferred). For additional information, refer to Figure 2-41. DS20002035E-page 2 2007-2021 Microchip Technology Inc.