USB3317 Hi-Speed USB Transceiver with 1.8V-3.3V ULPI Interface - 26MHz Reference Clock Data Brief PRODUCT FEATURES USB-IF Hi-Speed compliant to the Universal Serial Carkit UART mode for non-USB serial data transfers Bus Specification Rev 2.0 Industrial Operating Temperature -40 C to +85C Interface compliant with the ULPI Specification Packaging Options revision 1.1 as a Single Data Rate (SDR) PHY 24 pin QFN lead-free RoHS compliant package (4 x 4 x 0.90 mm height) 1.8V to 3.3V IO Voltage (10%) 25 ball VFBGA lead-free RoHS compliant package also flexPWR Technology available (3 x 3 x 0.88mm height) Low current design ideal for battery powered applications Applications Sleep mode tri-states all ULPI pins and places the part in a low current state The USB3317 is targeted for any application where a Hi- Supports FS pre-amble for FS hubs with a LS device Speed USB connection is desired and when board attached (UTMI+ Level 3) space, power, and interface pins must be minimized. Supports HS SOF and LS keep-alive pulse The USB3317 is well suited for: Includes full support for the optional On-The-Go Cell Phones (OTG) protocol detailed in the On-The-Go PDAs Supplement Revision 1.0a specification MP3 Players Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) GPS Personal Navigation Allows host to turn VBUS off to conserve battery Scanners power in OTG applications External Hard Drives Support OTG monitoring of VBUS levels with internal Digital Still and Video Cameras comparators Portable Media Players Wrapper-less design for optimal timing performance Entertainment Devices and design ease Printers Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI Set Top Boxes bridge Video Record/Playback Systems Internal 5V cable short-circuit protection of ID, DP IP and Video Phones and DM lines to VBUS or ground Gaming Consoles 26MHz Reference Clock Operation POS Terminals 0 to 3.6V input drive tolerant Able to accept noisy clock sources Internal low jitter PLL for 480MHz Hi-Speed USB operation Internal detection of the value of resistance to ground on the ID pin Integrated battery to 3.3V LDO regulator 2.2uF bypass capacitor 100mV dropout voltage Integrated ESD protection circuits Up to 15kV without any external devices SMSC USB3317 REV C PRODUCT PREVIEW Revision 2.1 (06-02-10) Hi-Speed USB Transceiver with 1.8V-3.3V ULPI Interface - 26MHz Reference Clock Order Number(s): USB3317C-CP-TR FOR 24 PIN, QFN LEAD-FREE ROHS COMPLIANT PACKAGE (TAPE AND REEL) USB3317C-GJ-TR FOR 25 PIN, VFBGA LEAD-FREE ROHS COMPLIANT PACKAGE (TAPE AND REEL) REEL SIZE IS 4000 PIECES. This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright 2010 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at