X-On Electronics has gained recognition as a prominent supplier of SA30CA-TP ESD Protection Diodes / TVS Diodes across the USA, India, Europe, Australia, and various other global locations. SA30CA-TP ESD Protection Diodes / TVS Diodes are a product manufactured by Micro Commercial Components (MCC). We provide cost-effective solutions for ESD Protection Diodes / TVS Diodes, ensuring timely deliveries around the world.
We are delighted to provide the SA30CA-TP from our ESD Protection Diodes / TVS Diodes category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the SA30CA-TP and other electronic components in the ESD Protection Diodes / TVS Diodes category and beyond.
SA5.0(C)(A) THRU SA170(C)(A) E480232 Features Glass Passivated Chip Excellent Clamping Capability 500WATTS TVS Low Leakage 5.0 to 170 VOLTS For Bidirectional Devices Add C To The Suffix of The Part Number: i.e.SA5.0CA Fast Response Time Halogen Free Available Upon Request By Adding Suffix-H Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note1) Suffix Designates DO-15 RoHS Compliant. See Ordering Information) Mechanical Data Weight: 0.4 Gram(Appx.) Maximum Ratings D For Capacitive Load, Derate Current by 20% Operating Junction Temperature Range: -55C to +175C Storage Temperature Range: -55C to +175C Electrical Characteristics 25C Unless Otherwise Specified Cathode Mark A Peak Pulse Power P 500W T =25C PPM A Dissipation Steady State Power P 3.0 W T =75C B M(AV) L Dissipatoin D Maximum I =35A FM instantaneous forward V 3.5V F T =25C * J voltage *Pulse test: Pulse width 300 usec, Duty cycle 1% C 1.High Temperature Solder Exemption Applied, see EU Directive Annex 7a. Device Marking DIMENSIONS Unidirectional - Type Number and Cathode Band Bidirectional - Type Number Only INCHES MM DIM NOTE MIN MAX MIN MAX A 0.230 0.300 5.80 7.60 B 0.104 0.140 2.60 3.60 Pin Configuration C 0.026 0.035 0.70 0.90 D 1.000 ----- 25.40 ----- Cathode Anode Uni-directional Bi-directional Rev.3-3-0918 2021 4 0&&6(0, &20SA5.0(C)(A) THRU SA170(C)(A) Maxium REVERSE BREAKDOWN MAXIMUM PEAK REVERSE MCC BREAKDOWN TEST Temperature STAND- OFF VOLTAGE CLAMPING PULSE LEAKAGE PART NUMBER VOLTAGE CURRENT Coefficient of VOLTAGE VBR(V) VOLTAGE CURRENT VRWM VBR(V) MIN. IT IT (mA) VRWM(V) MAX. IT Ipp Vc(V) Ipp (A) IR( A) V (mV/) (BR) UNI-Polar BI-Polar SA5.0A SA5.0CA 5.0 6.40 7.00 10 9.2 55.4 600 5 SA6.0A SA6.0CA 6.0 6.67 7.37 10 10.3 49.5 600 5 SA6.5A SA6.5CA 6.5 7.22 7.98 10 11.2 45.5 400 5 SA7.0A SA7.0CA 7.0 7.78 8.60 10 12 42.5 150 6 SA7.5A SA7.5CA 7.5 8.33 9.21 1 12.9 39.5 50 7 SA8.0A SA8.0CA 8.0 8.89 9.83 1 13.6 37.5 25 7 SA8.5A SA8.5CA 8.5 9.44 10.40 1 14.4 35.4 10 8 SA9.0A SA9.0CA 9.0 10.00 11.10 1 15.4 33.1 5 9 SA10A SA10CA 10.0 11.10 12.30 1 17 30 1 10 SA11A SA11CA 11.0 12.20 13.50 1 18.2 28 1 11 SA12A SA12CA 12.0 13.30 14.70 1 19.9 25.6 1 12 SA13A SA13CA 13.0 14.40 15.90 1 21.5 23.7 1 13 SA14A SA14CA 14.0 15.60 17.20 1 23.2 22 1 14 SA15A SA15CA 15.0 16.70 18.50 1 24.4 20.9 1 16 SA16A SA16CA 16.0 17.80 19.70 1 26 19.6 1 17 SA17A SA17CA 17.0 18.90 20.90 1 27.6 18.5 1 19 SA18A SA18CA 18.0 20.00 22.10 1 29.2 17.5 1 20 SA20A SA20CA 20.0 22.20 24.50 1 32.4 15.7 1 23 SA22A SA22CA 22.0 24.40 26.90 1 35.5 14.4 1 25 SA24A SA24CA 24.0 26.70 29.50 1 38.9 13.1 1 28 SA26A SA26CA 26.0 28.90 31.90 1 42.1 12.1 1 30 SA28A SA28CA 28.0 31.10 34.40 1 45.4 11.2 1 31 SA30A SA30CA 30.0 33.30 36.80 1 48.4 10.5 1 36 SA33A SA33CA 33.0 36.70 40.60 1 53.3 9.6 1 39 SA36A SA36CA 36.0 40.00 44.20 1 58.1 8.8 1 41 SA40A SA40CA 40.0 44.40 49.10 1 64.5 7.9 1 46 SA43A SA43CA 43.0 47.80 52.80 1 69.4 7.3 1 50 SA45A SA45CA 45.0 50.00 55.30 1 72.7 7 1 52 SA48A SA48CA 48.0 53.30 58.90 1 77.4 6.6 1 56 SA51A SA51CA 51.0 56.70 62.70 1 82.4 6.2 1 61 SA54A SA54CA 54.0 60.00 66.30 1 87.1 5.9 1 65 SA58A SA58CA 58.0 64.40 71.20 1 93.6 5.4 1 70 SA60A SA60CA 60.0 66.70 73.70 1 96.8 5.3 1 71 SA64A SA64CA 64.0 71.10 78.60 1 103 5 1 76 SA70A SA70CA 70.0 77.80 86.00 1 113 4.5 1 85 SA75A SA75CA 75.0 83.30 92.10 1 121 4.2 1 91 SA78A SA78CA 78.0 86.70 95.80 1 126 4 1 95 SA85A SA85CA 85.0 94.40 104.00 1 137 3.7 1 103 SA90A SA90CA 90.0 100.00 111.00 1 146 3.5 1 110 SA100A SA100CA 100.0 111.00 123.00 1 162 3.1 1 123 SA110A SA110CA 110.0 122.00 135.00 1 177 2.9 1 133 SA120A SA120CA 120.0 133.00 147.00 1 193 2.6 1 146 SA130A SA130CA 130.0 144.00 159.00 1 209 2.4 1 158 SA150A SA150CA 150.0 167.00 185.00 1 243 2.1 1 184 SA160A SA160CA 160.0 178.00 197.00 1 259 2 1 196 SA170A SA170CA 170.0 189.00 209.00 1 275 1.9 1 208 For bidirectional type having V of 10 volts and less, the I limit is double. rwm R For parts without A , the V is 10% BR Rev.3-3-09182021 24 0&&6(0, &20