MIKROE-316

Manual Potentiometer Board All Mikroelektronikas development systems feature a large number of peripheral modules expanding microcontrollers range of application and making the process of program testing easier. In addition to these modules, it is also possible to use numerous additional modules linked to the development system through the I/O port connectors. Some of these additional modules can operate as stand-alone devices without being connected to the microcontroller. MikroElektronika Additional BoardPotentiometer Board The Potentiometer board is used for testing analog inputs of the microcontroller supplied on a development system. The board features eight 10K potentiometers with related jumpers. Connection between the additional board and a development system is established via a 2x5 connector on the additional board and a 2x5 connector on a development systems port which has analog pins. Potentiometers supplied on the additional board are used to adjust voltage levels on the microcontrollers analog pins. Maximum voltage level depends on the development system connected to the additional borad and can be either 5V or 3.3V. In case some of the potentiometers is not used, it is necessary to remove the appropriate jumper (J1-J8). Figure 1: Potentiometer board 2x5 female connector used for connection with development systems Figure 2: Back of the Potentiometer board MikroElektronika