Surface Mount RF Transformer TC1-1-13MG2+ 50 4.5 to 3000 MHz Features suitable for tin/lead and RoHS solder systems Generic photo used for illustration purposes onlyGeneric photo used for illustration purposes only wideband, 4.5 to 3000 MHz CASE STYLE: AT224-3CASE STYLE: AT224-3 balanced transmission line good return loss +RoHS Compliant+RoHS Compliant excellent amplitude unbalance, 0.5 dB typ. and The +Suffix identifies RoHS ComplianceThe +Suffix identifies RoHS Compliance.. See our w See our web site eb site phase unbalance, 2 deg typ. in 1 dB bandwidth ffor RoHS Compliance methodologies and qualificationsor RoHS Compliance methodologies and qualifications plastic base with leads aqueous washable Applications Reel Size Reel Size Devices/ReelDevices/Reel 7 7 20, 50, 100, 200, 500 20, 50, 100, 200, 500 balanced to unbalanced transformation 13 13 1000, 20001000, 2000 push-pull amplifiers PCS/DCS MMDS Electrical Specifications at 25C Parameter Frequency (MHz) Min. Typ. Max. Unit Impedance Ratio 1 Frequency Range 4.5 3000 MHz 2000-3000 3 Insertion Loss* 1000-2000 2 dB 4.5-1000 1 4.5-1000 2 Phase Unbalance Deg. 1000-2000 3 4.5-1000 0.5 Amplitude Unbalance dB 1000-2000 0.5 *Insertion Loss is referenced to mid-band loss, 0.5 dB typ. Maximum Ratings Pin Connections Function Pin Number Parameter Ratings Operating Temperature -40C to 85C PRIMARY DOT 6 Storage Temperature -55C to 100C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 Permanent damage may occur if any of these limits are exceeded. NOT USED 2 Config. G Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. REV. A C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled M111888 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp TC1-1-13MG2+ ED-11376/1 IG/TD/CP/AM Mini-Circuits 201120 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2 AAvailable Tvailable Tape and Reel ape and Reel at no extra cost at no extra cost TC1-1-13MG2+ Outline Drawing PCB Land Pattern Suggested Layout, Tolerance to be within .002 inch Outline Dimensions ( ) mm A B CD E F .150 .150 .150 .050 .030 .025 3.81 3.81 3.81 1.27 0.76 0.64 G H J K wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.10 Typical Performance Data FREQUENCY INSERTION INPUT AMPLITUDE PHASE (MHz) LOSS R. LOSS UNBALANCE UNBALANCE (dB) (dB) (dB) (Deg.) 4.50 0.18 31.52 0.69 3.81 10.00 0.18 34.60 0.56 1.78 50.00 0.19 33.50 0.56 0.11 100.00 0.24 29.68 0.55 0.19 500.00 0.46 19.52 0.45 0.81 1000.00 0.68 16.22 0.14 1.59 1500.00 0.90 15.89 0.29 0.89 2000.00 1.11 16.97 0.71 1.28 2500.00 1.62 12.88 0.78 5.79 3000.00 3.02 6.79 0.49 12.32 INSERTION LOSS INPUT RETURN LOSS 3.5 40.0 3.0 35.0 2.5 30.0 2.0 25.0 1.5 20.0 1.0 15.0 0.5 10.0 0.0 5.0 0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000 FREQUENCY (MHz) FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are Notes entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2 INSERTION LOSS (dB) RETURN LOSS (dB)