top hat Surface Mount TC1-6X+ RF Transformer 50 0.15 to 350 MHz Features good return loss usable over 0.05-400 MHz Generic photo used for illustration purposes only excellent amplitude unbalance, 0.1 dB typ. CASE STYLE: AT1521 and phase unbalance, 2 deg typ. in 1 dB bandwidth plastic base with leads +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications balanced to unbalanced transformation push-pull amplifiers Reel Size Devices/Reel 7 20, 50, 100, 200, 500 13 1000, 2000 Electrical Specifications at 25C Parameter Frequency (MHz) Min. Typ. Max. Unit Impedance Ratio 1 Ohm Frequency Range 0.15 350 MHz 0.15 - 350 3.0 Insertion Loss* 0.25 - 250 2.0 dB 0.3 - 125 1.0 * Insertion Loss is referenced to mid-band loss, 0.2 dB typ. Maximum Ratings Pin Connections Function Pin Number Parameter Ratings Operating Temperature -40C to 85C PRIMARY DOT 6 Storage Temperature -55C to 100C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 Permanent damage may occur if any of these limits are exceeded. NOT USED 2 Config. C Product Marking Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. REV. A B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. M151107 C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled ED-12659/1 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp TC1-6X+ IG/QL/AM 190619 Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2 Available Tape and Reel at no extra cost TC1-6X+ Demo Board MCL P/N: TB-145 Outline Drawing Suggested PCB Layout (PL-244) PCB Land Pattern Note: 1. Case Material Plastic 2. Termination Finish: Tin plate over Nickel plate. 3. Lead 1 identi er shall be located in the cross-hatched area shown, on bottom view. Identi er may be either a molded or marked feature. 4.Top-Hat total thickness: .013 inches max. Suggested Layout, Tolerance to be within .002 inch Outline Dimensions ( ) mm A B C D E F .150 .150 .160 .050 .040 .025 3.81 3.81 4.06 1.27 1.02 0.64 G H J K wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.15 Typical Performance Data FREQUENCY INSERTION INPUT (MHz) LOSS R. LOSS (dB) (dB) 0.15 0.73 12.89 0.25 0.61 16.56 0.30 0.57 17.77 0.50 0.44 23.21 2.00 0.31 30.49 10.00 0.26 33.62 50.00 0.35 24.13 125.00 0.61 16.90 250.00 1.31 11.59 350.00 2.16 9.26 INSERTION LOSS RETURN LOSS 2.5 50.0 2.0 40.0 1.5 30.0 1.0 20.0 0.5 10.0 0.0 0.0 0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350 FREQUENCY (MHz) FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are Notes entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2 INSERTION LOSS (dB) RETURN LOSS (dB)