top hat Surface Mount TC4-6TX+ RF Transformer 50 1.5 to 600 MHz Features wideband, 1.5-600 MHz Generic photo used for illustration purposes only good return loss CASE STYLE: AT1521 plastic base with leads aqueous washable +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Reel Size Devices/Reel CATV 7 20, 50, 100, 200, 500 VHF/UHF receivers/transmitters 13 1000, 2000 Electrical Specifications at 25C Parameter Condition Min. Typ. Max. Unit Impedance Ratio (secondary / primary) 4 Ohm Frequency Range 1.5 600 MHz 1.5-600 3.0 Insertion Loss* 2-400 2.0 dB 3-350 1.0 * Insertion Loss is referenced to mid-band loss, 0.6 dB typ. Maximum Ratings Pin Connections Function Pin Number Parameter Ratings Operating Temperature -20C to 85C PRIMARY DOT 6 Storage Temperature -55C to 100C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 Permanent damage may occur if any of these limits are exceeded. SECONDARY CT 2 Product Marking Config. A Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled REV. A to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp M151107 TC4-6TX+ IG/TD/CP/AM Mini-Circuits 151222 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2 Available Tape and Reel at no extra cost TC4-6TX+ Outline Drawing PCB Land Pattern Note: 1. Case Material Plastic 2. Termination Finish: Tin plate over Nickel plate. 3. Lead 1 identi er shall be located in the cross-hatched area shown, on bottom view. Identi er may be either a molded or marked feature. 4.Top-Hat total thickness: .013 inches max. Suggested Layout, Tolerance to be within .002 inch Outline Dimensions ( ) mm A B C D E F .150 .150 .160 .050 .040 .025 3.81 3.81 4.06 1.27 1.02 0.64 G H J K wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.15 Typical Performance Data FREQUENCY INSERTION INPUT (MHz) LOSS R. LOSS (dB) (dB) 1.00 0.99 18.04 2.00 0.79 21.15 3.00 0.69 23.26 50.00 0.65 34.11 150.00 0.79 29.54 200.00 0.83 26.00 300.00 0.95 20.67 350.00 0.90 17.75 400.00 1.10 16.06 600.00 1.84 9.91 TC4-6T+ TC4-6T+ INSERTION LOSS INPUT RETURN LOSS 5.0 35 30 4.0 25 3.0 20 15 2.0 10 1.0 5 0 0.0 0 100 200 300 400 500 600 0 100 200 300 400 500 600 FREQUENCY (MHz) FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are Notes entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2 INSERTION LOSS (dB) RETURN LOSS (dB)