MOD - 23 16-channel PWM LED Driver with I2C Store: store.modulowo.com Moduowo sp. z o.o. Tutorials: academy.modulowo.com ul. Mokotowska 1, Documentation and schematics: products.modulowo.com 00-640 Warsaw, POLAND Software and projects: app.modulowo.com E-mail: info modulowo.com Blog: blog.modulowo.com 16-channel PWM LED Driver with I2C MOD-23 This Driver is equipped with 16 PWM channels, controlled by I2C interface, to which, for example, LEDs can be connected. You can save the leads of the microcontroller due to the fact that the connection of the I2C interface requires only 2 cables and power supply. The circuit enables the setting of a 7-bit address with the use of SMD A0-A6 jumpers. In addition, the ENABLE signal lead is available. The module can be installed on breadboards. Specifications: Code and Product Name MOD-23 16-channel PWM LED Driver with I2C Integrated Circuit PCA9635PW Output pins 2x11 pin, +VCC, GND, PWM Outputs and SDA, SCL, ENABLE Power + 2.3 V do + 5.5 V LED Indication yes Dimensions 32 mm x 22 mm Configuration SMD A0-A6 jumpers for circuit addressing Additional Information double-sided tape for easy installation Your list of modules Each module has a unique serial number. Go to www.modulowo.com/list, enter the serial number and add the module to your list. This will allow quick access to the documentation and software. www.modulowo.com Technical documentation, Terms of Use and examples: products.modulowo.com