MOD - 25 Momentary Capacitive Touch Sensor Store: store.modulowo.com Moduowo sp. z o.o. Tutorials: academy.modulowo.com ul. Mokotowska 1, Documentation and schematics: products.modulowo.com 00-640 Warsaw, POLAND Software and projects: app.modulowo.com E-mail: info modulowo.com Blog: blog.modulowo.com Momentary Capacitive Touch Sensor MOD-25 Substitute a mechanical switch with a capacitive touch switch. The switch works also with the plexiglass with a thickness of 2-3 mm. Its size is 22 mm x 23 mm only. The capacitive touch switch has a built-in AT42QT1011 sensor. You can easily replace the mechanical switch you use now, for example, the micro-switch. Upon detection of touch, the OUT output shows a high state. The switch also has a negated OUT output. Note The LED indicating the state of the switch output is not installed. Specifications: Code and Product Name MOD-25 Momentary Capacitive Touch Sensor Integrated Circuit AT42QT1011 Output pins 4-pin ( VCC, OUT, GND, TIME ) Power + 1.8 V do + 5.5 V LED Indication no, there is a place for the LED Dimensions 22 mm x 23 mm Configuration FAST/SLOW mode jumper selection Additional Information double-sided tape for easy installation Your list of modules Each module has a unique serial number. Go to www.modulowo.com/list, enter the serial number and add the module to your list. This will allow quick access to the documentation and software. www.modulowo.com Technical documentation, Terms of Use and examples: products.modulowo.com