by The Leading Enterprise Internet of Things Solution Wireless Accelerometer - Tilt Sensor General Description Features of Monnit ALTA Sensors The ALTA Wireless Accelerometer - Tilt Sensor is a Wireless range of 1,200+ feet through 12+ walls * digital, low-power, low-profile, capacitive sensor that is Frequency-Hopping Spread Spectrum (FHSS) able to measure acceleration on three axes to provide a Improved interference immunity measure of pitch and roll. Improved power management for longer battery life ** (12+ years on AA batteries) Reports data as pitch and roll Encrypt-RF Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages) All ALTA sensors now have up to 3200 readings: - 10-minute heartbeats = 22 days Principle of Operation - 2-hour heartbeats = 266 days Over-the-air updates (future proof) The ALTA Wireless Accelerometer - Tilt Sensor Free iMonnit basic online wireless sensor monitoring activates at a set time interval (defined by user) and and notification system to configure sensors, view converts accelerometer measurements to pitch and data and set alerts via SMS text and email roll (0 to 180 -> -180 to 0). The data is displayed in degrees with 0.1 of resolution. Actual range may vary depending on environment. * Example: Pitch: 1.6 Roll: -0.1 Battery life is determined by sensor reporting ** frequency and other variables. Other power options are also available. Example Applications Inclination monitoring Wireless Range Comparison Wireless Range Comparison Pitch & roll Many additional applications Monnit ALTA Monnit Other Wireless Platforms Wifi Bluetooth PAGE 1Monnit Wireless Accelerometer Orientation (Commercial Coin Cell) 1.125 in Pinch and Pull (28.575 mm) To Change Battery Gravity + 2.0 in X (50.8 mm) CR2032 BATTERY 0.875 in + (22.225 mm) Y + Z ALTA Commercial Coin Cell Wireless Accelerometer - Tilt Sensor Technical Specifications Supply voltage 2.03.8 VDC * Current consumption 0.2 A (sleep mode), 0.7 A (RTC sleep), 570 A (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and coin cell) -7C to +60C (20F to +140F) ** Optimal battery temperature range (coin cell) +10C to +50C (+50F to +122F) Sensitivity 4096 count/g Sensitivity range selections +/-2 G, +/-4 G, +/-8 G Measurement accuracy 2.5 % (force: X, Y, Z) Minimum g-force to turn on/wake up 0.0500.100 g Fastest update interval/heart rate in any configuration Heartbeat: 1 minute Bandwidth for data measurement 800 Hz Measurement range (profile 4 tilt only) 0 to 180 -180 to -0 (Rotating in positive direction) Measurement resolution (profile 4 tilt only) 0.1 Integrated memory Up to 3200 sensor messages Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Weight 0.7 ounces Certifications Industry 900 MHz product FCC ID: ZTL-G2SC1 and IC: 9794A- Canada G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 Hardware cannot withstand negative voltage. Please take care when connecting a power device. * At temperatures above 100C, it is possible for the board circuitry to lose programmed memory. ** PinchPower Enclosures CR2032 BATTERY CR2032 BATTERY + Pinch Pull Press (press in on the sides) (sensor away from base) (sensor back into base) PAGE 2