MP2104DJ-LF-P

MP2104 1.7MHz, 600mA Synchronous Step-Down Converter The Future of Analog IC Technology DESCRIPTION FEATURES The MP2104 is a 1.7MHz constant frequency, High Efficiency: Up to 95% current mode, PWM step-down converter. The 1.7MHz Constant Switching Frequency device integrates a main switch and a 600mA Available Load Current synchronous rectifier for high efficiency without an 2.5V to 6V Input Voltage Range external Schottky diode. It is ideal for powering Output Voltage as Low as 0.6V portable equipment that runs from a single cell 100% Duty Cycle in Dropout Lithium-Ion (Li+) battery. The MP2104 can supply Current Mode Control 600mA of load current from a 2.5V to 6V input Short Circuit Protection voltage. The output voltage for the MP2104DJ Thermal Fault Protection can be regulated as low as 0.6V, while the output <0.1 A Shutdown Current voltages of the MP2104DJ-1.5 and 1.5V and 1.8V Fixed Output Versions MP2104DJ-1.8 are fixed at 1.5V and 1.8V, Space Saving 5-Pin TSOT23 and 6-pin thin respectively. The MP2104 can also run at 100% QFN Packages duty cycle for low dropout applications. The MP2104 is available in low profile (1mm) APPLICATIONS 5-pin TSOT and 0.75mm TQFN-6 packages. Cellular and Smart Phones ORDERING INFORMATION Microprocessors and DSP Core Supplies PDAs Part Number Output Voltage MP3 Players MP2104DJ-1.5 VOUT = 1.5V Digital Still and Video Cameras MP2104DJ-1.8 VOUT = 1.8V Portable Instruments MP2104DJ VOUT = 0.6V to 6V MP2104DQT VOUT = 0.6V to 6V MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. EVALUATION BOARD REFERENCE Board Number Dimensions EV2104DJ-00A 2.0X x 2.0Y x 0.5Z TYPICAL APPLICATION Efficiency vs Load Current 100 OUTPUT 4 3 V = 3.3V INPUT IN IN SW 1.8V 90 2.5V - 6V 600mA 80 MP2104DJ-1.8 V = 4.2V IN 70 5 1 60 OFF ON EN OUT GND 50 40 2 30 20 10 0 MP2104 TAC S01 10 100 1000 LOAD CURRENT (mA) MP2104-EC01 MP2104 Rev. 1.4 www.MonolithicPower.com 1 3/4/2020 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. 2020 MPS. All Rights Reserved. EFFICIENCY (%)MARKING MP2104 1.7MHz 600mA SYNCHRONOUS STEP-DOWN CONVERTER ORDERING INFORMATION Part Number* Package Top Marking Temperature MP2104DJ TSOT23-5 C2 MP2104DJ-1.5 TSOT23-5 D7 -40C to +85 C MP2104DJ-1.8 TSOT23-5 D8 MP2104DQT TQFN-6 3A * For Tape & Reel, add suffix Z (eg. MP2104DJZ). For Lead Free, add suffix LF (eg. MP2104DJLFZ) PACKAGE REFERENCE TOP VIEW TOP VIEW 16 SW GND EN 1 5 FB or OUT GND25 IN GND 2 34 EN FB SW 3 4 IN EXPOSED PAD CONNECT TO GND PLANE (1) (5) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC V to GND ................................... -0.3V to +6.5V IN TSOT23-5 ............................... 220 .... 110 .. C/W V to GND ............................ -0.3V to V +0.3V SW IN TQFN-6 .................................... 50 ...... 12 ... C/W ....................... -1.5V to V + 1.5V for < 50ns IN MAX Notes: V , V to GND ........................... -0.3V to +6.5V FB EN 1) Exceeding these ratings may damage the device. SW Peak Current ......................................... 1.4A 2) The maximum allowable power dissipation is a function of the (2) maximum junction temperature TJ(MAX), the junction-to- Continuous Power Dissipation (T = +25C) A ambient thermal resistance JA, and the ambient temperature .0.57W TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD(MAX)=(TJ(MAX)- Junction Temperature ............................. +150 C TA)/ JA. Exceeding the maximum allowable power (3) Lead Temperature .............................. +260 C dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal Storage Temperature ............... -65 C to +150 C shutdown circuitry protects the device from permanent damage. (4) Recommended Operating Conditions 3) For recommended IR reflow temperature information, refer to Supply Voltage V ............................. 2.5V to 6V MPS document MP2104 IRRTP. IN 4) The device is not guaranteed to function outside of its Output Voltage V ........................... 0.6V to 6V OUT operating conditions. Operating Temperature .............. -40 C to +85C 5) Measured on JESD51-7, 4-layer PCB. MP2104 Rev. 1.4 www.MonolithicPower.com 2 3/4/2020 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. 2020 MPS. All Rights Reserved.