101-0364-EV Mountain Switch

Last Update: 09/04/12 Ref. : MS-100612 DIMENSIONS: mm (in.) 4.3 (.169) T1 T2 .70 (.028) 4.5 (.177) T3 T4 6.20 Circuit Diagram (.244) 6.4 3.5 (.252) (.138 ) I 4.5 3.5 H (.177) 1.3 (.138) (.051) 0~10 9 9.5 .20 .10 (.354) (.374) (.008 .004) PCB Layout Mechanical Specifications: Electrical Specifications: Materials: Type: SPST Rating: 50mA/12VDC Cover: stainless steel Operating Temperature: -25~+70C Insulation resistance: 100M min. 500VDC Contacts: silver clad phosphor bronze Operating Force: 160 50g Dielectric strength: 250VAC for 1 minute Terminals: silver clad brass Storage Temperature: -30~ +80C Contact resistance: 100m max. Base: LCP, brown Travel/Stroke: .25 +.2 / -.1mm) Electrical life: 500,000 cycles Stem: Nylon, brown Stop Strength: 3Kg for 15 seconds Dimensions (in.) mm Mouser Soldering Process: Stock No. H I (Max) The condition for Reflow Soldering is the temperature on the Cu foil of the PCB surface. There are cases where boards temperature greatly differs from switchs surface be used 101-0164-EV (.169) 4.30 (.0197) .50 not to allow switchs surface temperature to exceed 260C 101-0264-EV (.197) 5.00 (.0236) .60 Manual Soldering: Soldering Temperature: Max.350C 101-0364-EV (.276) 7.00 (.0236) .60 Continuous Soldering Time: Max. 5 Seconds 101-0464-EV (.374) 9.51 (.0236) .60 Note: RoHS Compliant General Tolerances: Max.+/-.20mm Tactile Switches (SMD) 101-0164-EV, 101-0264-EV, 101-0364-EV, 101-0464-EV www.mouser.com 1-800-346-6873 Available from Mouser Electronics Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental coSpecifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.mpliance based on producer documentation.