A1 Multicomp

A1 / SMA1 Cascadable Amplifier Rev. V3 5 to 500 MHz Features Product Image LOW NOISE: 2.4 dB (TYP.) LOW VSWR: 1.3:1 (TYP.) HIGH GAIN: 16 dB (TYP.) Description The A1 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number Package A1 TO-8 SMA1 Surface Mount MAAM-008712-000CA1 SMA Connectorized ** **The connectorized version is not RoHs compliant. Electrical Specifications: Z = 50, V = +15 V Absolute Maximum Ratings 0 CC DC Parameter Absolute Typical Guaranteed Maximum Parameter Units 25C 0 to 50C -54 to +85C* Storage Temperature -62C to +125C Frequency MHz 1-600 5-500 5-500 Case Temperature +125C DC Voltage +18 V Small Signal Gain (min) dB 16.0 15.0 14.5 Continuous Input Power +13 dBm Gain Flatness (max) dB 0.2 0.7 1.0 Short Term Input power 50 mW (1 minute max.) Reverse Isolation dB 19 Peak Power (3 sec max.) 0.5 W Noise Figure (max) dB 2.4 3.0 3.5 S Series Burn-In +125C Temperature (case) Power Output dBm -1.0 -2.0 -3.0 1 dB comp. (min) IP3 dBm +11 Thermal Data: V = +15 V CC DC IP2 dBm +10 Parameter Rating Second Order Harmonic IP dBm +15 Thermal Resistance 130C/W jc Transistor Power Dissipation P 0.057 W d VSWR Input / Output (max) 1.3:1 / 1.3:1 1.8:1 / 1.8:1 2.0:1 / 2.0:1 Junction Temperature Rise 7C DC Current 15 Volts (max) mA 9 11 12 Above Case T jc o o 11 * Over temperature performance limits for part number CA1, guaranteed from 0 C to +50 C only. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: A1 / SMA1 Cascadable Amplifier Rev. V3 5 to 500 MHz * Typical Performance Curves at +25C Outline Drawing: TO-8 WEIGHT: 1 gram (0.04 oz.) max * Outline Drawing: Surface Mount WEIGHT: 1 gram (0.04 oz.) max * Outline Drawing: SMA Connectorized WEIGHT: 19 grams (0.67 oz.) max 22 2 Dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: