SocketModem Cell Embedded Cellular Modems 4G-LTE Models BENEFITS Approved by carriers and regulatory agencies saving customers time, money, and protection from the risks associated with pursuing their own certifications Quick to market leveraging MultiTechs approvals Interchangeable communications devices for easy migration to future networks Long solution lifecycle reduces redesign time and cost The SocketModem Cellembedded cellular modem is a Support from leading experts in IoT/M2M technology FEATURES complete, ready-to-integrate communications device ideal for 4G Models (Cat 4, Cat 1 and Cat M1) customers looking to add 4G-LTE cellular communications to 4G Cat 4, Cat 1 Sprint and Cat M1 include GNSS their IoT/M2M solutions. These communications devices enable Universal Socket connectivity easy technology transitions and allow developers to add wireless Short Message Services (SMS) Serial or USB interfaces communication to products with a minimum of development Serial interface supports speeds up to 921.6K bps time and expense. The SocketModem Cell embedded cellular AT command compatible modems are carrier approved and end-device certified, USB 2.0 HS compatible decreasing time to market while saving customers money. Two-year warranty YourDevices&Data ConnectingYourDevices Insight+Action+Control Energy Alerts Financial/ Retail Real-Time Healthcare Management Remote Wireless Asset Monitoring Service Management Reports Provider Platform www.multitech.com/smcellHIGHLIGHTS Power Saving Modes (Cat M1 Models) Extended Discontinuous Reception (eDRX) mode increases the length of time the end device can sleep before it has to check in with the network which saves power. Power Saving Mode (PSM) allows the device to notify the network it is going to sleep or dormant indefinitely only waking up based on user defined timer. Once the device wakes up and transmits it will stay awake for afewframesoftimeincasethenetworkneedstoreachthatdevice.AdeviceusingPSMtransmittingasmallamountofdataonce perdaycouldlastmanyyearsusing2AAbatteries.(Note:Somepowersavingmodeswillbeavailableinafuturerfi mwarerelease.) SPECIFICATIONS MTSMC-L4N1 MTSMC-L4E1 Models MTSMC-L4N1-U MTSMC-L4E1-U LTE FDD Cat.4, LTE FDD Cat.4, 3GPP release 10 compliant 3GPP release 10 compliant Performance (Category 4 (Category 4 150 Mbps peak downlink/ 150 Mbps peak downlink/ 50 Mbps peak uplink) with 3G Fallback 50 Mbps peak uplink) with 3G/2G Fallback 4G: B2(1900), B4(AWS1700), B5(850), B12(700a), B13(700c), B14(700 FirstNet), 4G: B1(2100), B3(1800), B7(2600), B66(AWS-3 1700), B71(600) B8(900), B20(800), B28A(700) Frequency Bands (MHz) AT&T: B2, B4, B5, B12, B14 3G: B1(2100), B3(1800), B8(900) Verizon: B4, B13 2G: B3(1800), B8(900) 3G: B2(1900), B4(AWS1700), B5(850) SMS Mobile Originate, Mobile Terminated and Cell Broadcast / PDU or Text Mode USB USB 2.0 high speed compatible (-U Models) TCP/IP Functions FTP, SMTP, SSL, TCP, UDP Connectors Antenna : 3 UFL (Cellular, Rx Diversity/MIMO, GPS) / Mini SIM (2FF) 1.8V & 3V Dimensions 3.15 x 1.375 (80.010 mm x 34.925 mm) Serial Model 5VDC Serial Model 5VDC 4mA sleep, 20mA idle, 8mA sleep, 13mA idle, 615mA average at max power 747mA average at max power Power Draw* USB Model 5VDC 21mA idle, USB Model 5VDC 672mA average at max power 816mA average at max power Input Power 3.3V 5VDC Environmental Operating Temperature -40 C to +85 C (-40 F to +185 F) Storage Temperature -40 C to +85 C (-40 F to +185 F) Relative Humidity 20% to 90% RH noncondensing Certifications FCC Part 15 Class B EMC/Radio Compliance CE Mark, RED FCC Part 22, 24, 27 UL 60950-1 2nd ED, Safety IEC 60950-1 2nd ED cUL 60950-1 2nd ED Network PTCRB N/A Carrier AT&T, Verizon N/A * See device guides for additional information. All future end-user (OEM) devices will and must go through FirstNet certification prior to being included in the FirstNet device ecosystem.