766 Series www.murata-ps.com Pulse Transformers 1 SELECTION GUIDE Turns Order Code Ratio 2% H Vs H pF Vrms 76601/1C 1:1 1916 17.5 0.60 49 1.50 76601/2C 1:1 492 8.5 0.30 22 0.80 B1 FEATURES 76601/3C 1:1 219 5.5 0.25 12 0.50 500 RoHS compliant 76602/1C 1:1:1 2060 17.5 0.60 72 1.50 C 76611/2C 4:1:1 643 9.92 1.70 13 0.80 E 2 5 Congurations 76615/1C 1CT:1CT 3200 45 4.00 75 1.00 D Inductance to 11.7mH Please note: For additional variants please see 786 series datasheet. Up to 50 Vs ET Industry standard pinout 76600/1C 1:1 1916 17.5 0.60 49 1.50 76600/2C 1:1 492 8.5 0.30 22 0.80 500Vrms Isolation A 76600/3C 1:1 219 5.5 0.25 14 0.50 PCB mounting 76600/4C 1:1 50 4.0 0.20 10 0.40 1 500 UL 94 V-0 package materials 76601/20C 1:1 20.1 2.5 0.20 5 0.20 76601/23C 1:1 700 10.5 0.20 35 0.20 B Toroidal construction 76601/24C 1:1 11.7mH 50.5 0.86 250 1.35 Fully encapsulated 76616/3C 2CT:1CT 4350 23 3.00 35 1.00 D 2 ABSOLUTE MAXIMUM RATINGS DESCRIPTION Operating free air temperature range 0C to 70C The 766 Series is a range of general purpose -60C to 125C Storage temperature range pulse transformers. Common applications include line coupling, impedance-matching, or isolating. 1 SOLDERING INFORMATION The devices can also be used in small isolated Peak wave solder temperature 300C for 10 seconds power supplies or as common-mode chokes in ltering applications. Pin nish Matte tin with nickel pre-plate 1 For further information, please visit www.murata-ps.com/rohs All specications typical at T =25C. A For full details go to www.murata-ps.com/rohs www.murata-ps.com All enquiries: www.murata-ps.com/support KMP 766C I01 Page 1 of 3 Min. Primary Inductance Min. Primary Constant, ET Max. Leakage Inductance Max. Interwinding Capacitance Max. DC Resistance Max. Isolation Voltage Pin Connection Style Mechanical Dimensions766 Series Pulse Transformers PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS 12 12.70 (0.500) Max. 12.70 (0.500) Max. 1 2 1 2 610 3 602 4 6C 1C 5 6 5 6 XYYWW XYYWW 0.560.05 (0.0220.002) 0.560.05 (0.0220.002) 10.16 (0.400) 10.16 (0.400) Unless otherwise stated all dimensions in mm (inches) 0.25 (0.01). All pins on a 2.54 (0.1) pitch and within 0.25 (0.01) of true position. Package Weight: 1.1g Typ. RECOMMENDED FOOTPRINT DETAILS TUBE DIMENSIONS Y )0-&4 Holes may be omitted for variants with fewer than 6 pins. Unless otherwise stated all dimensions in mm (inches) 0.25 (0.01). Tube length: 5202.0 (20.470.08). Unless otherwise stated all dimensions in mm (inches) +0.50 (0.02)/-0.00 (0.00). All pins on a 2.54 (0.1) pitch and within 0.25 (0.01) of true position. www.murata-ps.com/support KMP 766C I01 Page 2 of 3 5.08 (0.200) 5.84 (0.230) 8.89 (0.350) Max. 2.54 (0.100) 10.00 (0.394) 6.35 (0.250) 2.54 (0.100) 5.84 (0.230) 8.89 (0.350) Max. 2.54 (0.100) 10.00 (0.394) 6.35 (0.250)