DSN9HB32E222Q55B

Reference Only Spec No. JENF243F-0022F-01 P1/8 Heavy Duty DiscType EMIFIL (Three-terminal capacitor) DSN9H series Reference Specification 1.Scope This reference specification applies to Heavy Duty Disc-Type EMIFIL(Three-terminal capacitor). 2.Part Numbering (Ex.) DS N 9 H B3 2E 271 Q93 A Product ID (Disc-Type EMIFIL Structure N : No Ferrite Beads Type Style Features Temperature Characteristics Rated Voltage Capacitance Marked three digits system.(Ex. 270pF271) Lead Type Q5 : Bulk (in mm) Long Lead Type Straight Lead Type Q55 Lead Length(l) 25.0 min. Lead Length (l) : See item 9. Q9 : Taping (in mm) Straight Lead Type Q91 Q92 Q93 Dimension H 20.01.0 16.51.0 18.51.0 Dimension H : See item 9. Packaging Code A : Ammo Pack / B : Bulk 3.Rating Operating temperature : -40 to +105C Storage Temperature : -55 to +105C Insulation Resistance : 10000M min. Rated Current : 6A(DC) Equivalent Circuit : 11 33 33 11 GNGNDD 22 Others : See Table 1 Table 1 Customer Murata Temperature Characteristics Rated Withstanding Unit Mass Capacitance Part Number Part Number Voltage Voltage (Typical value) 2585C 40105C DSN9HB32E220Q55B DSN9HB32E220Q91A 22pF 0.59g 20% DSN9HB32E220Q92A DSN9HB32E220Q93A DSN9HB32E101Q55B DSN9HB32E101Q91A 100pF 20% 20% DSN9HB32E101Q92A DSN9HB32E101Q93A 250V 10% 625V(DC) 0.52g (DC) DSN9HB32E271Q55B DSN9HB32E271Q91A 270pF 20% DSN9HB32E271Q92A DSN9HB32E271Q93A DSN9HB32E222Q55B DSN9HB32E222Q91A 2200pF 30% 0.58g 20% DSN9HB32E222Q92A DSN9HB32E222Q93A MURATA MFG.CO.,LTD Reference Only Spec No. JENF243F-0022F-01 P2/8 4.Testing Conditions <Unless otherwise specified> <In case of doubt> Temperature : Ordinary Temperature 15 to 35C Temperature : 20 2C Humidity : Ordinary Humidity 25 to 85 %(RH) Humidity : 60 to 70 %(RH) Atmospheric Pressure : 86 to 106 kPa 5.Style and Dimension See item 9. 6.Marking Characteristics Marked letter code : B (Temperature Charasteristics Number: B3) Marked real number. (22pF) Ex. 22pF22 Capacitance Marked three digits system. (100pF to 2200pF) Ex.2200pF222 Capacitance Tolerance Marked letter code. M (20%) Rated Voltage Marked voltage value. (250V) Trade Mark Marked as 7.Performance No. Item Specification Test Method 7.1 Appearance and Meet item 9. Visual Inspection and measured with Slide Calipers. Dimensions 7.2 Marking Marking is able to be read easily. Visual Inspection. 7.3 Capacitance Meet item 3. Table 2 and Frequency Test Voltage Capacitance Tolerance 10.1MHz 22pF270pF 10.2V(rms) 10.1kHz 2200pF 7.4 Insulation Meet item 3. Test Voltage : Rated Voltage Resistance(I.R.) Time : 1 minute. 7.5 Withstanding Products shall not be damaged. Test Voltage : 2.5 times for Rated Voltage Voltage Time : 1 to 5 seconds Charge Current : 10 mA max. 7.6 Temperature Meet item 3. Capacitance shall be measured at each step Characteristics specified in Table 3 after reaching the thermal equilibrium. The capacitance change against the capacitance at step 3 shall be calculated. Table3 -25 to 85C Step 1 2 3 4 5 Temp. +202 -252 +202 +852 +202 (C) -40 to 105C Step 1 2 3 4 5 Temp. +202 -402 +202 +1052 +202 (C) Flux : Ethanol solution of rosin,25(wt)% 7.7 Solderability Along the circumference of (dipped for 5 to 10 seconds) terminal shall be covered with new Pre-heat : 15010, 6090 s solder at least 75%. Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 2455 Immersion Time : 2 0.5 seconds Immersion Depth : 2 to 2.5 mm from the bottom of the body. MURATA MFG.CO.,LTD