1/13 SPEC No.J(E)TE243B-0016E-01 Reference Specifications Type FDSD0415 Physical dimensions Monthly Code (1-9,X,Y,Z) Inductance Code (See the next page) Tolerance : 0.3 Polarity Marking Unit : mm Inductance ID 3 The nominal inductance value is identified by three digits. 1) 3 2 2 3 H 2 Three digits ID,First 2 digits indicate the effective inductance value The last digit indicates the number of0 following first 2 digits.The unit is H. 2) R 2 H R2 2 digits and letter ID,The unit is H. Letterrepresent the decimal point. Priority language Let a priority language be japanese. MURATA MFG.CO., LTD.SPEC No.J(E)TE243B-0016E-01 FDSD0415 Type Electrical specifications Inductance Test DC Rated Current Rated Current Center Tolerance Freq. Resistance Based on Based on Inductance Customer s Part No. Part No. max. Inductance Change Temperature rise Code Value () kHz (m) (A) max. (A) max. FDSD0415-H-R22M=P3 0.22 20 100 14 12 7.7 E FDSD0415-H-R47M=P3 0.47 20 100 18 9.0 6.1 C FDSD0415-H-1R0M=P3 1.0 20 100 41 5.3 4.5 A FDSD0415-H-1R5M=P3 1.5 20 100 47 5.0 3.7 D FDSD0415-H-2R2M=P3 2.2 20 100 65 4.1 3.1 G FDSD0415-H-3R3M=P3 3.3 20 100 95 3.4 2.6 K FDSD0415-H-4R7M=P3 4.7 20 100 120 2.9 2.1 N 1 LCR 4284AKEYSIGHT 100kHz 0.5V Inductance Measured with a LCR meter 4284A(KEYSIGHT) or equivalent.Test Freq. 100kHzLevel 0.5V measurement point 2 34420AKEYSIGHT3541(HIOKI) DC Resistance (Picture-1 Measured with a Micro ohm meter 34420A(KEYSIGHT) or 3541(HIOKI) or equivalent. The measurement point of DCR is side of terminal. (refer to the Picture-1) Picture-1 3 Value defined when DC current flows and Rated Current (Based on Inductance Change)or Rated Current when current flows and Rated Current (Based on Temperature rise) whichever is smaller. 30% The DC saturation allowable current value is specified when the decrease of the initial inductance value at 30%. Rated Current (Based on Inductance Change) 40 Rated Current (Based on Temperature rise) is specified when temperature of the inductor on our PCB for test purpose is raised 40 by DC current. Rated Current (Based on Temperature rise) 4 30V DC * Absolute maximum voltage Absolute maximumvoltage30 DC. Unless otherwise specified, measurement is the standard atmospheric conditions. MURATA MFG.CO., LTD.