Product Information

GCM21BR72A683KA37K

GCM21BR72A683KA37K electronic component of Murata

Datasheet
Multilayer Ceramic Capacitors MLCC - SMDSMT 0.068uF 100Volts X7R 0.1

Manufacturer: Murata
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 0.2303 ea
Line Total: USD 0.23

15938 - Global Stock
Ships to you between
Thu. 23 May to Mon. 27 May
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
10369 - WHS 1


Ships to you between Thu. 23 May to Mon. 27 May

MOQ : 1
Multiples : 1
1 : USD 0.1656
10 : USD 0.0621
100 : USD 0.0368
1000 : USD 0.0333
2500 : USD 0.0299
10000 : USD 0.0287
50000 : USD 0.0265
100000 : USD 0.0241

     
Manufacturer
Product Category
Category
Packaging
Factory Pack Quantity :
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
GCM21BR7YA105KA55K electronic component of Murata GCM21BR7YA105KA55K

Murata Electronics Multilayer Ceramic Capacitors MLCC - SMDSMT
Stock : 0

GCM21BR91H333KA37L electronic component of Murata GCM21BR91H333KA37L

Multilayer Ceramic Capacitors MLCC - SMDSMT
Stock : 0

GCM3195C1H102JA16D electronic component of Murata GCM3195C1H102JA16D

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0.001uF 50Volts C0G 5%
Stock : 1689

GCM21BR91H104KA37L electronic component of Murata GCM21BR91H104KA37L

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0.1uF 50Volts X8R 0.1
Stock : 6520

GCM21BR72A683KA37L electronic component of Murata GCM21BR72A683KA37L

Murata Electronics Multilayer Ceramic Capacitors MLCC - SMDSMT 0.068uF 100Volts X7R 0.1
Stock : 8394

GCM21BR7YA105KA55L electronic component of Murata GCM21BR7YA105KA55L

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0805 1.0uF 35volts X7R 10%
Stock : 17800

GCM21BR91E334KA37L electronic component of Murata GCM21BR91E334KA37L

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0805 0.33uF 25volts X8R 10%
Stock : 5986

GCM21BR7YA684KA55K electronic component of Murata GCM21BR7YA684KA55K

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0805 0.68uF 35volts X7R 10%
Stock : 0

GCM21BR72A823JA37K electronic component of Murata GCM21BR72A823JA37K

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0805 0.082uF 100volt X7R 5%
Stock : 0

GCM21BR7YA684KA55L electronic component of Murata GCM21BR7YA684KA55L

Multilayer Ceramic Capacitors MLCC - SMDSMT 0805 0.68uF 35volts X7R 10%
Stock : 400

Image Description
C1210C393KARACTU electronic component of Kemet C1210C393KARACTU

Multilayer Ceramic Capacitors MLCC - SMDSMT 250V .039uF X7R 1210 10%
Stock : 457

GCE21BR72A683KA01L electronic component of Murata GCE21BR72A683KA01L

Multilayer Ceramic Capacitors MLCC - SMDSMT 0805 0.068uF100volts X7R 10%
Stock : 0

CBR08C409B5GAC electronic component of Kemet CBR08C409B5GAC

Multilayer Ceramic Capacitors MLCC - SMDSMT 50V 4pF C0G 0805 0.1pF
Stock : 4328

CBR08C809B5GAC electronic component of Kemet CBR08C809B5GAC

Multilayer Ceramic Capacitors MLCC - SMDSMT 50V 8pF C0G 0805 0.1pF
Stock : 597

SH32B104K501CT electronic component of Walsin SH32B104K501CT

Multilayer Ceramic Capacitors MLCC - SMDSMT 0.1uF 10% 500V Soft Termination
Stock : 3248

GCD21BR71H683KA01L electronic component of Murata GCD21BR71H683KA01L

Multilayer Ceramic Capacitors MLCC - SMDSMT 0805 0.068uF 50volts X7R 10%
Stock : 5998

TMK212ABJ225KD-T electronic component of Taiyo Yuden TMK212ABJ225KD-T

Multilayer Ceramic Capacitors MLCC - SMDSMT 0805 25V 2.2uF 10% X5R
Stock : 3733

C2220C334KARACTU electronic component of Kemet C2220C334KARACTU

Multilayer Ceramic Capacitors MLCC - SMDSMT .330UF 250V X7R 2220 0.1
Stock : 0

08055C105K4Z4A electronic component of Kyocera AVX 08055C105K4Z4A

Multilayer Ceramic Capacitors MLCC - SMDSMT 50V 1uF X7R 0805 10%TOL AEC-Q200
Stock : 43695

0402N102K500CT electronic component of Walsin 0402N102K500CT

Multilayer Ceramic Capacitors MLCC - SMDSMT 0402 MLCC NPO 1000 pF +- 10% 50 V T&R GP
Stock : 11581

Chip Multilayer Ceramic Capacitors for Automotive GCM21BR72A683KA37 (0805, X7R:EIA, 68000pF, DC100V) : packaging code Reference Sheet 1.Scope This product specification is applied to Chip Multilayer Ceramic Capacitors used for Automotive Electronic equipment. 2.MURATA Part NO. System (Ex.) GCM 21 B R7 2A 683 K A37 L (1)L/W (2)T (3)Temperature (4)Rated (5)Nominal (6)Capacitance (7)Muratas Control (8)Packaging Code Dimensions Dimensions Characteristics Voltage Capacitance Tolerance Code 3. Type & Dimensions (Unit:mm) (1)-1 L (1)-2 W (2) T e g 2.00.15 1.250.15 1.250.15 0.2 to 0.7 0.7 min. 4.Rated value (3) Temperature Characteristics Specifications and Test (4) (6) (Public STD Code):X7R(EIA) (5) Nominal Methods Rated Capacitance (Operating Temp. coeff Temp. Range Capacitance Voltage Tolerance Temp. Range) orCap. Change (Ref.Temp.) -55 to 125 C -15 to 15 % DC 100 V 68000 pF 10 % -55 to 125 C (25 C) 5.Package mark (8) Packaging Packaging Unit f180mm Reel L 3000 pcs./Reel EMBOSSED W8P4 f330mm Reel K 10000 pcs./Reel EMBOSSED W8P4 Product specifications in this catalog are as of May.31,2018,and are subject to change or obsolescence without notice. Please consult the approval sheet before ordering. Please read rating and Cautions first. GCM21BR72A683KA37-01 1AEC-Q200 Murata Standard Specification and Test Methods Specification. No AEC-Q200 Test Item AEC-Q200 Test Method Temperature High Dielectric Type Compensating Type Pre-and Post-Stress 1 - Electrical Test 2 High Temperature The measured and observed characteristics should satisfy the Solder the capacitor on the test substrate(glass epoxy board). Exposure (Storage) specifications in the following table. Set the capacitor for 1000+/-12h at 150+/-3. Appearance No marking defects Set for 24+/-2h at room temperature, then measure. Capacitance Within +/-2.5% or +/-0.25pF Within +/-10.0% Initial measurement for high dielectric constant type Change (Whichever is larger) Perform a heat treatment at 150+0/-10 for 1h and then sit Q or D.F. 30pFmin. : Q1000 R7/L8 W.V.: 25Vmin. : 0.03 max. for 24+/-2h at room temperature.Perform the initial measurement. 30pFmax.: Q 400+20C W.V.: 16V/10V : 0.05 max. C: Nominal Capacitance(pF) R9 : 0.075max. I.R. 5C/5G/R7/L8 : More than 10,000M or 500F(Whichever is smaller) 25 R9 : More than 3000M or 150 F(Whichever is smaller) 3 Temperature Cycling The measured and observed characteristics should satisfy the Solder the capacitor on the test substrate(glass epoxy board). specifications in the following table. Perform cycle test according to the four heat treatments listed Appearance No marking defects in the following table. Set for 24+/-2h at room temperature, then measure. Capacitance Within +/-2.5% or +/-0.25pF Within +/-10.0% Cycles Step Time(min) Change (Whichever is larger) 1000(for C/R7) 300(for 5G/L8/R9) 1 15+/-3 -55+0/-3 -55+0/-3 2 1 Room Room Q or D.F. 30pFmin. : Q1000 R7/L8 W.V.: 25Vmin. : 0.03 max. 3 15+/-3 125+3/-0 150+3/-0 30pFmax.: Q 400+20C W.V.: 16V/10V : 0.05 max. 4 1 Room Room C: Nominal Capacitance(pF) R9 : 0.075 max. Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10 for 1h and then sit I.R. More than 10,000M or 500F for 24+/-2h at room temperature.Perform the initial measurement. 25 (Whichever is smaller) 4 Destructive No defects or abnormalities Per EIA-469. Physical Analysis 5 Moisture Resistance The measured and observed characteristics should satisfy the Solder the capacitor on the test substrate(glass epoxy board). specifications in the following table. Apply the 24h heat (25 to 65) and humidity (80%RH to 98%RH) treatment shown below, 10 consecutive times. Appearance No marking defects Set for 24+/-2h at room temperature, then measure. Capacitance Within +/-3.0% or +/-0.30pF Within +/-12.5% Humidity Humidity Temperature Change (Whichever is larger) 8098% 8098% Humidity Humidity Humidity () 9098% 9098% 9098% 70 65 Q or D.F. 30pFmin. : Q350 R7/L8 : W.V.: 35Vmin.: 0.03 max. 60 55 10pF and over, 30pF and below: W.V.: 25Vmax. : 0.05 max. 50 Q275+5C/2 R9 : 0.075max. 45 40 10pFmax.: Q 200+10C 35 30 C: Nominal Capacitance(pF) 25 +10 20 - 2 15 I.R. 5C/5G/R7/L8 : More than 10,000M or 500F(Whichever is smaller) 10 5 Initial measuremt 25 R9 : More than 3000M or 150 F(Whichever is smaller) 0 -5 -10 One cycle 24hours 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Hours Initial measurement for high dielectric constant type Perform a heat treatment at 150+0/-10 for 1h and then sit for 24+/-2h at room temperature.Perform the initial measurement. 6 The measured and observed characteristics should satisfy the Biased Humidity Solder the capacitor on the test substrate(glass epoxy board). specifications in the following table. Apply the rated voltage and 1.3+0.2/-0Vdc (add 6.8k resister) at 85+/-3 and 80%RH to 85%RH humidity for 1000+/-12h. Appearance No marking defects The charge/discharge current is less than 50mA. Remove and set for 24+/-2h at room temperature, then measure. Capacitance Within +/-3.0% or +/-0.30pF Within +/-12.5% Change (Whichever is larger) Initial measurement for high dielectric constant type Q or D.F. 30pF and over: Q200 R7/L8 W.V.: 35Vmin.: 0.035 max.* Perform a heat treatment at 150+0/-10 for 1h and then sit 30pF and below: Q100+10C/3 * GCM188L81H221 to 103 : 0.05 max. for 24+/-2h at room temperature.Perform the initial measurement. C: Nominal Capacitance(pF) W.V.: 25Vmax. : 0.05 max. R9 : 0.075max. I.R. More than 1,000M or 50F 25 (Whichever is smaller) JEMCGS-0363V 2

Tariff Desc

8532.24.00 43 no --Ceramic dielectric, multilayer Free

ELECTRICAL CAPACITORS, FIXED, VARIABLE OR ADJUSTABLE (PRE-SET)
IPDiA
MU2
MUP
MUR
MURATA
Murata - TOKO
Murata / IPDiA
Murata Electronics
Murata Electronics N
Murata Electronics North America
MURATA MANUFACTURING
Murata Manufacturing Co.
Murata Power Solutio
Murata Power Solutions
Murata Power Solutions Inc
Murata Power Solutions Inc.
Toko
TOKO AMERICA
Toko America Inc.
TOKO, Inc.
TOKYO PARTS INDUSTRIAL
Tokyo Parts Industrial Group

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted