HPR103C Murata

HPR1XXC Series www.murata-ps.com 0.75 Watt Single Output DC/DC Converters FEATURES n Low Cost n Multiple Package Styles n Internal Input and Output The HPR1XXC Series uses advanced circuit design and packaging technology to deliver superior reliability and n Filtering performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are reduced when using the HPR1XXC Series with high frequency isolation amplifiers. n Non-Conductive Case Reduced parts count and high efficiency add to the reliability of the HPR1XXC Series. The high efficiency of the n High Output Power Density: HPR1XXC Series means less internal power dissipation, as low as 190mW. 3 10 Watts/Inch With reduced heat dissipation the HPR1XXC Series can operate at higher temperatures with no degradation. In n Extended Temperature Range: addition, the high efficiency of the HPR1XXC Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although a >1mA -25C to +85C minimum load is needed to realize published specifications. n Efficiency to 79% The HPR1XXC Series provides the user a low cost converter without sacrificing reliability. The use of surface mounted n RoHS Compliant devices and advanced manufacturing technologies make it possible to offer premium performance and low cost. As of October 2016, ONLY the following part numbers will be available: HPR100C HPR105C HPR107C HPR116C HPR117C HPR118C SPECIFICATIONS All specifications are typical at T = +25C nominal input voltage unless otherwise specified. A PRODUCT SELECTION CHART Nominal Input Rated Output Rated Output Input Current Reflected Ripple Efficiency Voltage Voltage Current Current Model Recommended Alternatives No Load Rated Load VDC VDC mA mA mAp-p % HPR100C 5 5 150 20 216 10 69 NMR100C / MER1S0505SC HPR101C 5 12 62 20 212 5 70 NMR101C / MER1S0512SC HPR102C 5 15 50 20 212 5 71 NMR102C / MER1S0515SC HPR103C 5 5 75 20 218 5 68 NMA0505SC / MEA1D0505SC HPR104C 5 12 30 20 212 5 68 NMA0512SC / MEA1D0512SC HPR105C 5 15 25 20 200 5 75 NMA0515SC / MEA1D0515SC HPR106C 12 5 150 10 90 5 69 NMR106C / MER1S1205SC HPR107C 12 12 62 10 81 5 77 NMR107C / MER1S1212SC HPR110C 12 12 30 10 81 5 74 NMA1212SC / MEA1D1212SC HPR111C 12 15 25 10 81 5 77 NMA1215SC / MEA1D1215SC HPR112C 15 5 150 8 72 5 69 MER1S1505SC HPR113C 15 12 62 8 72 5 69 MER1S1512SC HPR116C 15 12 30 8 63 5 76 MEA1D1512SC HPR117C 15 15 25 8 63 5 79 MEA1D1515SC HPR118C 24 5 150 8 48 15 65 MER1S2405SC HPR120C 24 15 50 8 45 15 76 MER1S2415SC HPR122C 24 12 30 8 45 15 67 MEA1D2412SC HPR123C 24 15 25 8 45 15 69 MEA1D2415SC HPR108C 12 15 50 10 81 5 77 NMR108C / MER1S1215SC HPR109C 12 5 75 10 88 5 71 NMA1205SC / MEA1D1205SC HPR114C 15 15 50 8 72 5 69 MER1S1515SC HPR115C 15 5 75 8 72 5 69 MEA1D1505SC HPR119C 24 12 62 8 48 15 65 MER1S2412SC HPR121C 24 5 75 8 45 15 69 MEA1D2405SC For full details go to www.murata-ps.com/rohs www.murata-ps.com/support TDC HPR1xxC.E02 Page 1 of 4HPR1XXC Series 0.75 Watt Single Output DC/DC Converters SPECIFICATIONS, ALL MODELS Specifications are at T = +25C nominal input voltage unless otherwise s pecified. A PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC Voltage Rise Time See Typical Performance Curves & Application Notes: Capacitive Loading Effects on Start-Up of DC/DC Converters OUTPUT Rated Power 750 mW Voltage Setpoint Accuracy Rated Load, Nominal V 5 % IN Ripple & Noise BW = DC to 10MHz 150 200 mVp-p BW =10Hz to 2MHz 30 40 mVrms Voltage (Over Input Voltage Range) 1mA to Rated Current, V = 5V 4.75 7 VDC OUT 1mA to Rated Current, V = 12V 11.40 15 VDC OUT 1mA to Rated Current, V = 15V 14.25 18 VDC OUT Temperature Coefficent .01 .05 %/ C REGULATION Load Regulation (All other modes) Rated Load to 1mA Load 3 % GENERAL ISOLATION Rated Voltage 750 VDC Test Voltage 60 Hz, 10 Seconds 750 Vrms Resistance 10 G W Capacitance 25 100 pF Leakage Current V = 240VAC, 60Hz 2 8.5 mArms ISO Switching Frequency 170 kHz Frequency Change Over Line and Load 24 % Package Weight 3 g MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method Ground Benign T = +25C 7.9 MHr A Fixed Ground T = +35C 1.9 MHr A Naval Sheltered T = +35C 1.2 MHr A Airborne Uninhabited Fighter T = +35C 300 kHr A TEMPERATURE Specification -25 +25 +85 C Operation -40 +100 C Storage -40 +110 C SOLDERING INFORMATION The HPR1XXC devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the devices plastic body will not be compromised and internal temperatures within the converter will not exceed 175C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com/support TDC HPR1xxC.E02 Page 2 of 4 GENERAL OUTPUT INPUT