X-On Electronics has gained recognition as a prominent supplier of LQH2HPN1R0MGRL Fixed Inductors across the USA, India, Europe, Australia, and various other global locations. LQH2HPN1R0MGRL Fixed Inductors are a product manufactured by Murata. We provide cost-effective solutions for Fixed Inductors, ensuring timely deliveries around the world.
We are delighted to provide the LQH2HPN1R0MGRL from our Fixed Inductors category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the LQH2HPN1R0MGRL and other electronic components in the Fixed Inductors category and beyond.
Spec No.: JELF243A 0103S-01 P1/9 CHIP COILS (CHIP INDUCTORS) LQH2HPNGR REFERENCE SPECIFICATION 1. Scope This reference specification applies to chip coils (chip inductors) LQH2HPN GR series for general electronic equipment. 2. Part Numbering (Ex.) LQ H 2H P N 1R0 M G R L Product ID Structure Dimension Application and Category Inductance Tolerance Dimension Other Packaging (L W) characteristic (T) L: 180 taping *B: bulk *B: Bulk packing is also available. 3. Part Number and Rating Operating (ambient temperature not including self-temperature rise) -40C to +105C (except LQH2HPN101MGR) temperature (product temperature including self-temperature rise) -40C to +125C (except LQH2HPN101MGR) range (ambient temperature not including self-temperature rise) -40C to +85C (only LQH2HPN101MGR) (product temperature including self-temperature rise) -40C to +105C (only LQH2HPN101MGR) Storage temperature range -40C to +105C (except LQH2HPN101MGR) -40C to +85C (only LQH2HPN101MGR) Rated current Inductance (mA) DC Self-resonant Based on temperature Customer Murata *2 resistance frequency rise Nominal Based on Part number Part number Tolerance ( ) (MHz min.) value inductance Ambient Ambient (%) *1 (H) change temperature temperature *3 *4 85C 105C LQH2HPNR47MGRL 0.47 20 0.04520% 120 2900 2520 1470 LQH2HPNR68MGRL 0.68 20 0.05520% 110 2430 2330 1350 LQH2HPN1R0MGRL 1.0 20 0.06820% 100 2130 2100 1200 LQH2HPN1R5MGRL 1.5 20 0.08720% 90 1700 1850 1110 LQH2HPN2R2MGRL 2.2 20 0.13420% 80 1550 1470 850 LQH2HPN3R3MGRL 3.3 20 0.22520% 70 1230 1100 660 LQH2HPN4R7MGRL 4.7 20 0.30020% 50 1090 1000 570 LQH2HPN6R8MGRL 6.8 20 0.39520% 40 830 860 490 LQH2HPN100MGRL 10 20 0.56020% 30 700 710 430 LQH2HPN150MGRL 15 20 0.92520% 20 570 560 310 LQH2HPN220MGRL 22 20 1.36020% 15 460 430 250 LQH2HPN101MGRL 100 20 5.90020% 5 210 150 - *1 When rated current is applied to the products, inductance will be within 30% of initial inductance value range. *2 Keep the temperature (ambient temperature plus self-generation of heat) under 125C (except LQH2HPN101MGR) Keep the temperature (ambient temperature plus self-generation of heat) under 105C (only LQH2HPN101MGR) *3 When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 40C max (except LQH2HPN101MGR) When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 20C max (only LQH2HPN101MGR) *4 When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 20C max. MURATA MFG CO., LTD Spec No.: JELF243A 0103S-01 P2/9 4. Testing Conditions Unless otherwise specified Temperature: ordinary temperature (15C to 35C) Humidity: ordinary humidity 25% to 85% (RH) In case of doubt Temperature: 20C2C Humidity: 60% to 70% (RH) Atmospheric pressure: 86 kPa to 106 kPa 5. Appearance and Dimensions Unit mass (typical value): 0.019 g 6. Marking No marking. 7. Electrical Performance No. Item Specification Test method 7.1 Inductance Meet chapter 3 ratings. Measuring equipment: Keysight 4192A or the equivalent Measuring frequency: 1 MHz 7.2 DC resistance Meet chapter 3 ratings. Measuring equipment: digital multimeter 7.3 Self-resonant Meet chapter 3 ratings. Measuring equipment: Keysight E4991A or the frequency equivalent 8. Mechanical Performance No. Item Specification Test method 8.1 Shear test No significant mechanical damage or no Test substrate: glass-epoxy substrate sign of electrode peeling off shall be Force application direction: observed. Applying force: 5 N Holding time: 5 s1 s MURATA MFG CO., LTD