PLT5BPH1015R6SNL Murata

Reference Only Spec No. :JEFL243B-9102H-01 P1/10 SMD type common-mode choke coil Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to SMD type Common Mode Choke Coil PLT5BPH Series for Automotive Electronics based on AEC-Q200. 2. Part Numbering (ex.) PLT 5BP H 101 5R6 S N L Product ID Type Application Common Mode Rated Winding Dimenssion Packaging Impedance Zc Current Mode code HAutomotive LTaping (180mm reel) B Bulk 3. Rating Common DC Insulation Mode * Rated Rated Withstand Resistance Resistance ESD Impedance Zc Current Customer MURATA Rank Voltage Voltage (Rdc) (I.R.) (at10MHz) (A) Part Number Part Number 2.2kV () V(DC) V(DC) (m 30%) (Mmin.) 125C 150C Typ. Min. PLT5BPH1015R6SNL 100 60 5.6 2.9 4 PLT5BPH1015R6SNB PLT5BPH2014R4SNL 200 120 4.4 2.4 7 PLT5BPH2014R4SNB 80 200 10 2 PLT5BPH3013R7SNL 300 180 3.7 2.2 11 PLT5BPH3013R7SNB PLT5BPH5013R1SNL 500 300 3.1 1.8 17 PLT5BPH5013R1SNB Operating Temperature range : -55C +150C Storage Temperature range : -55C +150C * Rated Current is derated as below figure depending on the operating temperature. 7 6 5.6A PLT5BPH1015R6SN 5 4.4A PLT5BPH2014R4SN 4 3.7A PLT5BPH3013R7SN 3.1A PLT5BPH5013R1SN 3 2.9A 2.4A 2.2A 2 1.8A 1 0 0 50 100 125 150 200 Operating Temperature () MURATA MFG.CO.,LTD Rated Curent (A)Reference Only Spec No. :JEFL243B-9102H-01 P2/10 4. Standard Testing Conditions < Unless otherwise specified > < In case of doubt > Temperature: Ordinary Temp.15 C to 35 C Temperature: 20 C 2 C Humidity: Ordinary Humidity 25 %(RH) to 85 %(RH) Humidity: 60 %(RH) to 70 %(RH) Atmospheric pressure: 86 kPa to 106 kPa 5. Style and Dimensions Equivalent Circuit (1) (2) (4) (3) No Polarity : E le c tr ode ( ) :R efe r ence Value (in:mm) Unit Mass (Typical value) 0.48g 6. Marking No Marking. 7. Electrical Performance No. Item Specification Test method 7.1 Common Mode Meet item 3 Measuring Equipment: KEYSIGHT 4991A or the equivalent Measuring Frequency: 10MHz (ref.item 9) Impedance (Zc) Typ. 7.2 Insulation Measuring Voltage: Rated Voltage Resistance (I.R.) Time: within 1min. (ref.item 9) Withstand 7.3 Products shall not be damaged. Voltage: Rated Voltage2.5 Voltage V(DC) Time: 1~5s. Measuring current: 1mA max. (ref.item 9) 7.4 DC Resistance Meet item 3 Measuring Current : 100mA (ref.item 9) (Rdc) (In case of doubt in the above mentioned standard condition,measure by 4 terminal method.) MURATA MFG.CO.,LTD