RFM products are now Murata products. RF3603D 310.0 to 319.5 MHz Filter Optimized for use with the TRC105 Transceiver Balanced 150 ohm IC Interface 316.4 MHz Complies with Directive 2002/95/EC (RoHS) Pb SAW Filter Absolute Maximum Ratings Rating Value Units Input Power Level +15 dBm DC Voltage 5 V Operating Temperature Range -40 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum 265 C SM3838-8 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 316.4 MHz C 1 dB Bandwidth BW 13 MHz 1 Maximum Insertion Loss, 310.0 to 319.5 MHz IL 1.8 2.2 MAX Amplitude Ripple, p-p, 310.0 to 319.5 MHz 1.0 Rejection Referenced to Insertion Loss at 315.0 MHz: DC to 300 MHz 37 39 dB 336 to 366 MHz 18 22 366 to 966 MHz 43 47 966 to 1266 MHz 43 48 1266 to 2000 MHz 28 32 Z Source Impedance 50 S Z Balanced Load Impedance 150 L Case Style SM3838-8 3.8 x 3.8 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 886, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Single-ended Port 6 Balanced Port 1, 3 Case Ground 4, 5, 7, 8 No Connection 2 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. US and international patents may apply. 6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. 2010-2014 by Murata Electronics N.A., Inc. RF3603D (R) 11/24/14 Page 1 of 10 www.murata.com 2010-2014 by Murata Electronics N.A., Inc. RF3603D (R) 11/24/14 Page 2 of 10 www.murata.com