RFM products are now Murata products. RX5500 433.92 MHz Designed for Short-Range Wireless Control Applications 3 V, Low Current Operation plus Sleep Mode Hybrid Receiver Characterized for Automotive Applications High EMI Rejection Capability Complies with Directive 2002/95/EC (RoHS) The RX5500 hybrid receiver is ideal for short-range wireless control applications where robust operation, small size, low power consumption and low cost are required. The RX5500 employs Muratas amplifier- sequenced hybrid (ASH) architecture to achieve this unique blend of characteristics. All critical RF functions are contained in the hybrid, simplifying and speeding design-in. The RX5500 is sensitive and stable. A wide dynamic range log detector provides robust performance in the presence of on-channel interference or noise. SM-20L Case Two stages of SAW filtering provide excellent receiver out-of-band rejection. The RX5500 generates virtually no RF emissions, facilitating compliance with ETSI I-ETS 300 220 and similar regulations. Absolute Maximum Ratings Rating Value Units Power Supply and All Input/Output Pins -0.3 to +4.0 V Non-Operating Case Temperature -50 to +100 C Soldering Temperature (10 seconds / 5 cycles max.) 260 C Electrical Characteristics Characteristic Sym Notes Minimum Typical Maximum Units f Operating Frequency 433.72 434.12 MHz o Modulation Types OOK & ASK Data Rate 19.2 kbps Receiver Performance, High Sensitivity Mode Sensitivity, 1.2 kbps, 10-3 BER, AM Test Method 1 -110.5 dBm Sensitivity, 1.2 kbps, 10-3 BER, Pulse Test Method 1 -104.5 dBm Current, 1.2 kbps (R = 330 K) 22.9 mA PR Sensitivity, 2.4 kbps, 10-3 BER, AM Test Method 1 -109 dBm Sensitivity, 2.4 kbps, 10-3 BER, Pulse Test Method 1 -103 dBm Current, 2.4 kbps (R = 330 K) PR 23.0 mA Sensitivity, 19.2 kbps, 10-3 BER, AM Test Method 1 -105 dBm Sensitivity, 19.2 kbps, 10-3 BER, Pulse Test Method 1 -99 dBm Current, 19.2 kbps 3.1 mA Receiver Performance, Low Current Mode Sensitivity, 1.2 kbps, 10-3 BER, AM Test Method 1 -104 dBm Sensitivity, 1.2 kbps, 10-3 BER, Pulse Test Method 1 -98 dBm Current, 1.2 kbps (R = 2000 K) 21.65 mA PR 2010-2015 by Murata Electronics N.A., Inc. RX5500 (R) 4/15/15 Page 1 of 9 www.murata.comElectrical Characteristics (typical values given for 3.0 Vdc power supply, 25 C) Characteristic Sym Notes Minimum Typical Maximum Units R Receiver Out-of-Band Rejection, 5% fo 5%380 dB R Receiver Ultimate Rejection ULT 3 100 dB I Sleep Mode Current S 0.7 A V Power Supply Voltage Range 2.2 3.7 Vdc CC mV Power Supply Voltage Ripple 10 P-P T Ambient Operating Temperature -40 85 C A CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: -3 1. Typical sensitivity data is based on a 10 bit error rate (BER), using DC-balanced data. There are two test methods commonly used to measure OOK/ASK receiver sensitivity, the 100% AM test method and the Pulse test method. Sensitivity data is given for both test methods. See Appendix 3.8 in the ASH Transceiver Designers Guide for the details of each test method, and for sensitivity curves for a 2.2 to 3.7 V supply voltage range at five operating temperatures. The application/test circuit and component values are shown on the next page and in the Designers Guide. 2. At low data rates it is possible to adjust the ASH pulse generator to trade-off some receiver sensitivity for lower operating current. Sensitivity data and receiver current are given at 1.2 kbps for both high sensitivity operation (R = 330 K) and low current operation (R = 2000 K). PR PR 3. Data is given with the ASH radio matched to a 50 ohm load. Matching component values are given on the next page. 4. See Table 1 on Page 8 for additional information on ASH radio event timing. SM-20L Package Drawing B CD E F A ASH Transceiver Pin Out GND1 RFIO 1 20 H VCC1 2 19 GND3 G AGCCAP 3 18 CNTRL0 PKDET 4 17 CNTRL1 mm Inches BBOUT 5 16 VCC2 Dimension CMPIN 6 15 PWIDTH Min Nom Max Min Nom Max RXDATA 7 14 PRATE A 10.795 10.922 11.049 .425 .430 .435 TXMOD 8 13 THLD1 B 9.525 9.652 9.779 .375 .380 .385 LPFADJ 9 12 THLD2 C 1.778 1.905 2.032 .070 .075 .080 10 11 D 3.048 3.175 3.302 .120 .125 .130 GND2 RREF E 0.381 0.508 0.635 .015 .020 .025 F 0.889 1.016 1.143 .035 .040 .045 G 3.175 3.302 3.429 .125 .130 .135 H 1.778 1.905 2.032 .070 .075 0.80 2010-2015 by Murata Electronics N.A., Inc. RX5500 (R) 4/15/15 Page 2 of 9 www.murata.com