P3A-090604CU New Age

NOTES: UNLESS OTHERWISE SPECIFIED R E V I S I O N 1. CORNERS DRAWN SHARP TO BE R.005 MAXIMUM. REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED 2. EXTERIOR SURFACE TEXTURE TO BE LIGHT EDM FINISH. A M BOYER DR XXX PRELIMINARY RELEASE 17-Sep-11 D.C. EQUIVELANT TO MT-11010. 3. INTERIOR SURFACE TEXTURE TO BE: NONE. B M BOYER ADD THICKER COMPONENTS 09-May-12 D.C. 4. ALL INSIDE RADII .010R. UNLESS OTHERWISE SPECIFIED. C M BOYER ADD SECOND PRESS POST 15-May-12 D.C. 5. ALL EXTERNAL DIMENSIONS AFFECTED BY THE DRAFT APPLY AT THE LARGE END OF THE FEATURE, AND ALL INTERNAL FEATURES D M BOYER REDUCE WIDTH AND THICKNESS 16-May-12 D.C. AFFECTED BY THE DRAFT APPLY AT THE SMALL END OF THE FEATURE UNLESS OTHERWISE SPECIFIED. E M BOYER ADD VIEWS AND NOTES 06-Feb-13 6. 1 DEGREE DRAFT IN THE DIRECTION OF PULL IS PERMISSIBLE UNLESS OTHERWISED SPECIFIED. 7. THIS ENCLOSURE IS A PRESS FIT ASSEMBLY. FOR PERMANENT CLOSURE: A DROP OF ADHESIVE OR ULTRASONIC WELDING IS REQUIRED. 8. MATERIAL / COLOR: ABS PLASTIC IS STANDARD IN BLACK OR WHITE. CUSTOM MATERIALS AND COLORS ARE AVAILABLE UPON REQUEST FOR QUOTE. 9. PCB SIZES ARE RECOMMENDATIONS ONLY. FINAL SIZES AND VOLUME = .0771 INCH 3 VERIFICATION OF IT S FIT ARE THE SOLE RESPONSIBILITY OF OEM. 10. THE GATE REMNANT FOR THIS ENCLOSURE IS LOCATED IN THIS POSITION TO MINIMIZE THE COSMETIC IMPACT. IT IS HOWEVER VISIBLE AND VARIES 4 IN SIZE / SHAPE. IT IS EASILY REMOVED WITH CLIPPERS. IF YOU WOULD LIKE NEW AGE TO CLIP THIS FOR YOU, PLEASE ASK YOUR SALES REPRESENTIVE FOR A FREE QUOTE. 11. THIS DRAWING IS BASED ON A SOLID MODEL, AND IS FURTHER DEFINED BY THE SOLID MODEL FILE. VOLUME = .0513 INCH 3 12. ALLOWABLE FLASH: 0.010 MAX. 13. ALL EJECTOR PIN MARKS TO BE WITHIN 0.010 OF FLUSH, 2 PROTRUDING OR BELOW FLUSH. EXAMPLES NOTE 10 14. TRIM GATE WITHIN 0.015 OF FLUSH. CONFIGURATION LEGEND -Tx = BOTH COVER AND BASE ARE TALL -Fx = BOTH COVER AND BASE ARE SHORT (FLAT) -Cx = ONLY THE COVER IS TALL (BASE IS FLAT) -Bx = ONLY THE BASE IS TALL (COVER IS FLAT) 5 -xS = STANDARD ENCLOSURE (NO USB OPENING) -xU = ENCLOSURE WITH MOLDED TYPE A USB OPENING NOTE 10 090604(xx) CONFIGURATIONS VOLUME = .0463 INCH 3 1 -TS -TU -FS -FU -CS -CU -BS -BU 090604 COVER 1 1 090604 COVER w/ TYPE A USB 1 1 090606 TALL COVER 1 1 090606 TALL COVER w/ TYPE A USB 1 1 VOLUME = .0732 INCH 3 3 090604 BASE 1 1 SCALE 2.000 090604 BASE w/ TYPE A USB 1 1 090606 TALL BASE 1 1 090606 TALL BASE w/ TYPE A USB 1 1 TOLERANCES: UNLESS OTHERWISE SPECIFIED THIRD ANGLE PROJECTION DIMENSIONS ARE IN U.S. INCHES. X.XX = .015 X.XXXX = .001 X.XXX = .010 X.X = 1 5 090604 PCB - REFERENCE .062 THICK CUSTOMER SUPPLIED 1 DO NOT SCALE DRAWING 4330 Santa Fe Road San Luis Obispo, CA. 93401 NEW AGE ENCLOSURES 4 090606U COVER - STANDARD ABS BLACK or WHITE 1 ph. (805) 595-1310 fax (805) 595-1024 NOTICE: THE INFORMATION AND DATA Customer s Part No: 090604 www.newageenclosures.com 3 090606U BASE - STANDARD ABS BLACK or WHITE 1 CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO ALLTEC INTEGRATED APPROVAL BY DATE MFG INC & SHALL REMAIN THE EXCLUSIVE 2 090604U COVER - STANDARD ABS BLACK or WHITE 1 PROPERTY OF ALLTEC INTEGRATED MFG INC CHECK EXPAND. USB - STANDARD THE HOLDER WILL ASSUME CUSTODY AND CONTROL THAT THIS DOCUMENT WILL 1 090604U BASE - STANDARD ABS BLACK or WHITE 1 ENG. NOT BE COPIED, REPRODUCED, OR DISCLOSED WITHOUT THE EXPRESS WRITTEN 090604XX-XXX SCALE CONSENT OF ALLTEC INTEGRATED MFG INC AS NOTED ITEM DESCRIPTION MATERIAL COLOR QTY. POSSESSION OF THIS DOCUMENT DOES NOT CONSTITUTE A GRANT TO DRAWN BY SIZE DRAWING NAME SHEET REV.DOC MANUFACTURE ANY ITEMS. 2013 BILL OF MATERIALS M BOYER 17-Sep-11 A 090604 RE 1 OF 7 E090604FU ASSEMBLY .315 .010 SEE DETAIL A Y (.516) J J P P .060 .940 .123 .062 .010 SECTION J-J SECTION Y-Y Y 2.0 R.080 SCALE 1.500 .630 .031 CLEARANCE FOR USB WELD 2.0 DETAIL A SCALE 3.000 TOLERANCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN U.S. INCHES. X.XX = .015 X.XXXX = .001 X.XXX = .010 X.X = 1 4330 Santa Fe Road San Luis Obispo, CA. 93401 NEW AGE ENCLOSURES ph. (805) 595-1310 fax (805) 595-1024 Customer s Part No: 090604 www.newageenclosures.com APPROVAL BY DATE CHECK EXPAND. USB - STANDARD ENG. SECTION P-P 090604XX-XXX SCALE 3.000 SCALE AS NOTED DRAWN BY SIZE DRAWING NAME SHEET REV.DOC M BOYER 17-Sep-11 A 090604 RE 2 OF 7 E