R E V I S I O N NOTES: UNLESS OTHERWISE SPECIFIED REV. DRAWN BY ECO No DESCRIPTION DATE APPROVE 1. CORNERS DRAWN SHARP TO BE R.005 MAXIMUM. A M BOYER DRXXX PRELIMINARY RELEASE 2017-May-03 2. EXTERIOR SURFACE TEXTURE TO BE LIGHT EDM FINISH. EQUIVALENT TO MT-11010. TEXTURE ON ENCLOSURE WILL VARY FROM TIME TO TIME AS THE TOOL WEARS AND IT BECOMES NESSESARY TO REAPPLY. 3. INTERIOR SURFACE TEXTURE TO BE: NONE. 4. ALL INSIDE RADII .010R. UNLESS OTHERWISE SPECIFIED. 5. ALL EXTERNAL DIMENSIONS AFFECTED BY THE DRAFT APPLY AT THE LARGE END OF THE FEATURE, AND ALL INTERNAL FEATURES AFFECTED BY THE DRAFT APPLY AT THE SMALL END OF THE FEATURE UNLESS R E V I S I O N OTHERWISE SPECIFIED. REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED 6. 1 DEGREE DRAFT IN THE DIRECTION OF PULL IS PERMISSIBLE UNLESS OTHERWISED SPECIFIED. A M BOYER DR XXX PRELIMINARY RELEASE 2017-Feb-01 2 7. MATERIAL / COLOR: ABS PLASTIC IS STANDARD IN BLACK OR WHITE. CUSTOM MATERIALS AND COLORS ARE AVAILABLE UPON REQUEST FOR QUOTE. ALTERNATE RESINS HAVE DIFFERENT SHRINK RATES, AND WILL EFFECT DIMENSIONS. 8. PCB SIZES ARE RECOMMENDATIONS ONLY. FINAL SIZES AND VERIFICATION OF ITS FIT ARE THE SOLE RESPONSIBILITY OF EACH CUSTOMER. 9. ASSEMBLY SCREWS FOR THE ENCLOSURE INCLUDED. 10. THIS DRAWING IS BASED ON A SOLID MODEL, AND IS FURTHER DEFINED BY THE SOLID MODEL FILE. 3 11. ALLOWABLE FLASH: 0.010 MAX. 12. ALL EJECTOR PIN MARKS TO BE WITHIN 0.010 OF FLUSH, PROTRUDING OR BELOW FLUSH. 13. TRIM GATE WITHIN 0.030 OF FLUSH. 1 SCALE 1.000 4 SCALE 1.000 TOLERANCES: UNLESS OTHERWISE SPECIFIED THIRD ANGLE PROJECTION DIMENSIONS ARE IN U.S. INCHES. X.XX = .015 X.XXXX = .001 X.XXX = .010 X.X = 1 DO NOT SCALE DRAWING 4330 Santa Fe Road San Luis Obispo, CA. 93401 NEW AGE ENCLOSURES 4 SCREW HILO-NO4X375 4 HiLo x .375 SCREW ZINK PLATED 3/8 LONG 4 ph. (805) 595-1310 fax (805) 595-1024 NOTICE: THE INFORMATION AND DATA Customer s Part No: 292910 www.newageenclosures.com 3 292910-PCB - ABS - 1 CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO ALLTEC INTEGRATED APPROVAL BY DATE MFG INC & SHALL REMAIN THE EXCLUSIVE 2 292910-COVER - ABS - 1 PROPERTY OF ALLTEC INTEGRATED MFG INC CHECK STANDARD - 3 ROUND WALL THE HOLDER WILL ASSUME CUSTODY AND CONTROL THAT THIS DOCUMENT WILL 1 292910-BASE - ABS - 1 ENG. NOT BE COPIED, REPRODUCED, OR DISCLOSED WITHOUT THE EXPRESS WRITTEN XXX-292910-XXX SCALE CONSENT OF ALLTEC INTEGRATED MFG INC AS NOTED ITEM FILE NAME DESCRIPTION MATERIAL COLOR QTY. POSSESSION OF THIS DOCUMENT DOES NOT CONSTITUTE A GRANT TO DRAWN BY SIZE DRAWING NAME SHEET REV.DOC MANUFACTURE ANY ITEMS. 2017 BILL OF MATERIALS M BOYER 2017-May-03 292910 RA 1 OF 6 A A 2823.3278 1.000 1 4 HiLo x .375 SCREW 0.0031 1.000 ZINK PLATED 4 - 6.5040 1.040 0.2435 110.553 ABS 1 - 0.3287 1.040 0.0123 5.587 ABS 1 - 0.7988 1.040 0.0335 15.205 ABS 1 - 1.1374 1.040 0.0389 17.660 ABS 1 - 0.0349 36127292.003 - 1 FILE NAME VOLUME 3 DENSITY 3 LBS GRAMS MATERIAL QTY.292910 ASSEMBLY P X X P 2.900 73,66 .025 0,64 SCALE 0.700 .287 7,29 .685 17,4 .030 SEE DETAIL A 0,76 1.027 26,09 .090 2,29 .227 5,77 DETAIL A SCALE 1.500 TOLERANCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN U.S. INCHES. X.XX = .015 X.XXXX = .001 SECTION P-P X.XXX = .010 X.X = 1 SECTION X-X 4330 Santa Fe Road San Luis Obispo, CA. 93401 NEW AGE ENCLOSURES .090 ph. (805) 595-1310 fax (805) 595-1024 .533 Customer s Part No: 292910 www.newageenclosures.com 2,29 13,54 APPROVAL BY DATE CHECK STANDARD - 3 ROUND WALL ENG. XXX-292910-XXX SCALE AS NOTED DRAWN BY SIZE DRAWING NAME SHEET REV.DOC M BOYER 2017-May-03 292910 RA 2 OF 6 A A