Product Information

NIN-FA220JTRF

NIN-FA220JTRF electronic component of NIC

Datasheet
Inductor RF Chip Molded Wirewound 22uH 5% 2.52MHz 30Q-Factor 105mA 3.7Ohm DCR 1210 T/R

Manufacturer: NIC
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

2000: USD 0.2073 ea
Line Total: USD 414.6

0 - Global Stock
MOQ: 2000  Multiples: 2000
Pack Size: 2000
Availability Price Quantity
0 - WHS 1


Ships to you between Wed. 22 May to Tue. 28 May

MOQ : 2000
Multiples : 2000
2000 : USD 0.2073
4000 : USD 0.199
8000 : USD 0.199

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Tolerance
Product
Brand
Inductance
Maximum Dc Current
Maximum Dc Resistance
Self Resonant Frequency
Shielding
Operating Temp Range
Rad Hardened
Failure Rate
Case Size
Packaging
Type
Impedance
Test Frequency
Military Standard
Product Depth Mm
Technology
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
NIN-FA4R7JTR220F electronic component of NIC NIN-FA4R7JTR220F

Inductor RF Chip Molded Wirewound 4.7uH 5% 7.96MHz 30Q-Factor 220mA 1.5Ohm DCR 1210 T/R
Stock : 0

NIN-FA8R2KTRF electronic component of NIC NIN-FA8R2KTRF

Inductor RF Chip Molded Wirewound 8.2uH 10% 7.96MHz 30Q-Factor 140mA 2Ohm DCR 1210 T/R
Stock : 0

NIN-FA2R7JTR290F electronic component of NIC NIN-FA2R7JTR290F

Inductor RF Chip Molded Wirewound 2.7uH 5% 7.96MHz 30Q-Factor 290mA 1.1Ohm DCR 1210 T/R
Stock : 339

NIN-FA3R3JTR260F electronic component of NIC NIN-FA3R3JTR260F

Inductor RF Chip Molded Wirewound 3.3uH 5% 7.96MHz 30Q-Factor 260mA 1.2Ohm DCR 1210 T/R
Stock : 0

NIN-FAR22KTRF electronic component of NIC NIN-FAR22KTRF

Inductor RF Chip Molded Wirewound 220nH 10% 25.2MHz 25Q-Factor 360mA 290mOhm DCR 1210 T/R
Stock : 0

NIN-FA2R2JTR320F electronic component of NIC NIN-FA2R2JTR320F

Inductor RF Chip Molded Wirewound 2.2uH 5% 7.96MHz 30Q-Factor 320mA 1Ohm DCR 1210 T/R
Stock : 914

NIN-FA3R9JTR250F electronic component of NIC NIN-FA3R9JTR250F

Ind Chip Molded Wirewound 3.9uH 5% 7.96MHz 30Q-Factor 250mA 1210 Embossed Plastic T/R
Stock : 0

NIN-FA3R9JTRF electronic component of NIC NIN-FA3R9JTRF

Inductor RF Chip Molded Wirewound 3.9uH 5% 7.96MHz 30Q-Factor 175mA 1.3Ohm DCR 1210 T/R
Stock : 0

NIN-FA680JTR50F electronic component of NIC NIN-FA680JTR50F

MOLDED CHIP WIREWOUND INDUCTORS WITH INDUCTANCE RANGE 0.01 TO 470 UH
Stock : 0

NIN-FA6R8JTR180F electronic component of NIC NIN-FA6R8JTR180F

Ind Chip Molded Wirewound 6.8uH 5% 7.96MHz 30Q-Factor 180mA 1210 Embossed Plastic T/R
Stock : 0

Image Description
C1206C121J5GACTU electronic component of Kemet C1206C121J5GACTU

Multilayer Ceramic Capacitors MLCC - SMD/SMT 50V 120pF C0G 1206 5%
Stock : 865

GRM32ER61A226KE20L electronic component of Murata GRM32ER61A226KE20L

Multilayer Ceramic Capacitors MLCC - SMD/SMT 1210 22uF 10volts X5R 10%
Stock : 995

C1206C122J1GAC7800 electronic component of Kemet C1206C122J1GAC7800

Multilayer Ceramic Capacitors MLCC - SMD/SMT 1200PF 100V 5% 1206
Stock : 0

GRM32ER61C106KA12L electronic component of Murata GRM32ER61C106KA12L

Multilayer Ceramic Capacitors MLCC - SMD/SMT 10uF 16V 1210 RoHS
Stock : 700

GRM32ER61C226KE20L electronic component of Murata GRM32ER61C226KE20L

Multilayer Ceramic Capacitors MLCC - SMD/SMT SUGGESTD REPLACEMENT 81-GRM219R61C226ME5
Stock : 475

C1206C122J5GACTU electronic component of Kemet C1206C122J5GACTU

Multilayer Ceramic Capacitors MLCC - SMD/SMT 50volts 1200pF C0G 5%
Stock : 7483

C1206C122K5RAC7800 electronic component of Kemet C1206C122K5RAC7800

Cap Ceramic 0.0012uF 50V X7R 10% SMD 1206 125C T/R
Stock : 28000

GRM32ER61C476ME15K electronic component of Murata GRM32ER61C476ME15K

Multilayer Ceramic Capacitors MLCC - SMD/SMT SUGGESTD REPLACEMENT 81-GRM31CR61C476ME4L
Stock : 21592

C1206C122K5RACTU electronic component of Kemet C1206C122K5RACTU

Multilayer Ceramic Capacitors MLCC - SMD/SMT 50volts 1200pF X7R 10%
Stock : 375

GRM32ER61E226KE15K electronic component of Murata GRM32ER61E226KE15K

Multilayer Ceramic Capacitors MLCC - SMD/SMT 22uF 25Volts 10%
Stock : 39393

NIN Series Molded Chip Wirewound Inductors FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH SRF CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE AVAILABLE TYPE AND RANGE Inductance EIA Size Size Code Size (L x W x H mm) NIC Type Style Range 0805 D 2.0 x 1.25 x 1.25 NIN-ND 10nH ~ 1.0 H Standard NIN-FC 0.22 ~ 100 H Standard 1008 C 2.5 x 2.0 x 1.6 NIN-NC 10nH ~ 0.82 H High Frequency NIN-PC 1.0 ~ 33 H High Curret NIN-FA 0.22 ~ 220 H Standard 1210 A 3.2 x 2.5 x 2.2 NIN-NA 47nH ~ 8.2 H High Frequency NIN-PA 1.0 ~ 330 H High Current NIN-FB 0.1 ~ 1000 H Standard 1812 B 4.5 x 3.2 x 3.2 NIN-PB 1.0 ~ 680 H High Current Note: Extended values, tolerances, and enhanced versions are available please contact NIC for more details. SPECIFICATIONS Case Size Speci cations 0805 1008 1210 1812 Inductance Range 10nH ~ 1.0 H 10nH ~ 100 H 47nH ~ 330 H 0.10 H ~ 1000 H Inductance Tolerance 10% (K), 5% (J) 20% (M), 10% (K), 5% (J) 10% (K), 5% (J) Operating Temperature Range -25C ~ +85C (at 100% of rated voltage) Insulation Resistance 1,000 MegOhm Min. ( 100Vdc, Termination to Case) Withstanding Voltage 250Vdc for 1 minute (Termination to Case) Q Factor, Self Resonant Frequency, DC Resistance, Rated DC Current See Individual Product Listings and Inductance Tolerance ENVIRONMENTAL CHARACTERISTICS Test Speci cation Test Method & Condition Solderability 90% Min. Coverage After 3 Sec. Dip in +230C Solder Pot (Post Flux) Humidity After 500 Hrs at +60C and 90~95% RH (1) No Evidence of Damage Soldering Effect After 5 Sec. at +260C (5 min. 120C Pre-Heat) (2) Inductance Shall Be Within Low Frequency Vibration 5% of Initial Value After 2 Hrs per Axis, 10 ~ 55Hz, 1.5mm Amplitude (3) Q Factor Shall Be Within Thermal Shock After 100 Cycles (-40C ~ +85C) 30 Min. Each 10% of Initial Value Low Temperature Storage After 500 Hrs at -40C High Temperature Load (1) No Evidence of Damage After 500 Hrs. at +85C with Rated DC Current Life (2) Inductance Shall Be Within 10% of Initial Value (3) Q Factor Shall Be Within After 500 Hrs at +60C with 90~95% RH Humidity Load Life 10% of Initial Value at Rated DC Current NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Speci cations are subject to changeMolded Chip Wirewound Inductors NIN Series DIMENSIONS (mm) SIZE A, C and D SIZE B MARKING MARKING L L B B EIA Size Size Code Dim. L Dim. W Dim. H Dim. A Dim. B +0.3 0805 D 2.0 / 1.25 0.3 1.25 0.3 1.0 0.1 0.4 0.2 -0.2 +0.3 1008 C 2.5 / 2.0 0.2 1.6 0.2 1.2 0.1 0.4 0.2 -0.2 1210 A 3.2 0.3 2.5 0.2 2.2 0.2 1.9 0.1 0.6 0.2 1812 B 4.5 0.3 3.2 0.2 3.2 0.2 1.2 0.2 1.0 0.2 PART MARKING (1) 3 digits system in H Inductance Marking for Example Tolerance Tolerance (2) R indicates decimal point in H Ex:2R7 = 2.7H 20% M 2R2M Ex:R18 = .18H = 180nH 10% No Identi cation 470 (3) N indicates nanohenries (0.001 H), Ex: 10N = 0.01 H = 10nH 5% J 270J Applicable Guidelines: 1. Recommended soldering conditions : o o Flow (wave): 250 C for 5 sec. max. (preheating of 120 C for 5 minutes.) o Re ow: 250 C for 10 sec. max., total time above 230C is 40 sec. max. (preheating 150C ~ 180C/120 sec. max.) 2. Avoid placing inductor over any metal pattern on the PCB, which may create mutual inductance problems. 3. For mounting, it is suggested to secure chip inductor by means of epoxy adhesive curable by ultraviolet. 4. Ultrasonic cleaning is not recommended. If it is necessary, the cleaning conditions must be examined so as not to create mechanical damage by unexpected resonant vibration. Please contact our engineering department. 5. An excessive mechanical force may effect the electrical and magnetic properties of chip inductors. Make sure not to use any stress greater than 2Kg when component is placed. PART NUMBER SYSTEM NIN-FA R47 M TR F Lead Free/RoHS compliant (99.3% Sn, 0.7% Cu) Packaging: TR = Tape & Reel Inductance Tolerance Code: M = 20%, K = 10%, J = 5% Rated inductance in H (3 digits, rst 2 numbers are signi cant, R stands for decimal point) Series-Type NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 Speci cations are subject to change W H A A W H A

Tariff Desc

8532.24.00 43 no --Ceramic dielectric, multilayer Free

ELECTRICAL CAPACITORS, FIXED, VARIABLE OR ADJUSTABLE (PRE-SET)
NI9
NIC COMPONENTS
NIC COMPONENTS CORP
NIC Components Corp.
NIP

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted