TVX1H330MAD Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS Standard, For General Purposes - Axial Lead Type TVX (02 type) (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Specifications Item Performance Characteristics Category Temperature Range 40 to +85C (6.3 to 250V), 25 to +85C (315 to 450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 10000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) 6.3 to 100 160 to 450 In case of CV 1000 After 1 minute s application of rated voltage at 20C, After 1 minute s application of rated voltage at 20C, not more than 0.03CV or 4 (A) , whichever is greater. Leakage Current not more than 0.1CV+40 (A) . Leakage current In case of CV > 1000 After 2 minutes application of rated voltage at 20C, After 1 minute s application of rated voltage at 20C, not more than 0.01CV or 3 (A) , whichever is greater. not more than 0.04CV+100 (A) . Measurement frequency : 120Hz at 20C Rated voltage (V) 6.3 10 16 25 35 50 63 to 100 160 to 315 350 to 450 Tangent of loss angle (tan ) tan (MAX.) 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.25 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 to 100 160 to 250 315 350 400 450 Stability at Low Temperature Z25C / Z+20C Impedance ratio 4 3 2 2 2 4 6 15 (MAX.) Z40C / Z+20C 10 8 6 4 3 12 Capacitance change Within 20% of the initial capacitance value The specifications listed at right shall be met when Endurance the capacitors are restored to 20C after the rated tan 200% or less than the initial specified value voltage is applied for 2000 hours at 85C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 85C for Capacitance change Within 20% of the initial capacitance value 1000 hours and then performing voltage treatment Shelf Life tan 200% or less than the initial specified value based on JIS C 5101-4 clause 4.1 at 20C, they shall Leakage current Less than or equal to the initial specified value meet the characteristic requirements at right. Marking Printed with white color letter on purple blue sleeve. Axial Lead Type Type numbering system (Example : 10V 330 F) 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 T V X 1 A 3 3 1 M A D Pressure relief vent T V X 1 A 3 3 1 M A D Sleeve (P.E.T.) Pressure relief vent (10up) Configuration d Sealing rubber packing ( ) (10up) Configuration Sleeve P.E.T. d Capacitance tolerance (20%) Sealing rubber packing Capacitance tolerance (20%) Rated capacitance (330F) Rated capacitance (330F) Rated voltage (10V) Rated voltage (10V) Series name + MAX 35MIN L 35MIN Series nameType + MAX 35MIN L 35MIN Type Configuration Configuration Pb-free leadwire D Pb-free PET sleeve (mm) Pb-free leadwire D 5 to 8 Pb-free PETAD sleeve (D < 10) 1 D 5 to 13 16 to 18 5 to 8 AD 10 to 18 CD (D 10) 2 d 0.6 0.8 10 to 18 CD Please refer to page 22 about the taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 196 D + D + 0.5MAX 0.5MAXALUMINUM ELECTROLYTIC CAPACITORS TVX (02 type) Dimensions V 6.3 10 16 25 35 50 63 100 Cap.(F) Code 0J 1A 1C 1E 1V 1H 1J 2A R47 5 12 5 5 12 10 0.47 010 5 12 10 5 12 18 1 2R2 5 12 23 5 12 28 2.2 3R3 5 12 28 5 12 34 3.3 4R7 5 12 34 5 12 40 4.7 10 100 5 12 50 5 12 55 6.3 12 60 22 220 5 12 70 6.3 12 85 6.3 12 90 8 16 120 33 330 5 12 80 6.3 12 90 6.3 16 110 6.3 16 120 8 16 150 47 470 5 12 85 6.3 12 100 6.3 16 120 6.3 16 130 8 16 160 8 20 190 101 5 12 110 6.3 12 130 6.3 16 160 6.3 16 170 8 16 210 8 16 220 8 20 260 10 26 340 100 221 6.3 16 200 6.3 16 210 8 16 260 8 16 280 8 20 340 10 21 410 10 26 480 13 26 560 220 331 6.3 16 250 8 16 300 8 16 320 8 20 380 10 21 460 10 26 560 13 26 650 13 31.5 750 330 471 8 16 330 8 16 350 8 20 430 10 26 510 10 26 610 13 26 730 13 31.5 840 16 31.5 970 470 102 10 21 600 10 21 640 10 26 770 13 26 900 13 31.5 1060 16 31.5 1260 16 31.5 1330 1000 222 13 26 1020 13 26 1090 13 31.5 1180 16 31.5 1480 16 31.5 1580 18 41 1920 2200 332 13 26 1200 13 31.5 1390 16 31.5 1620 16 41.5 1710 16 41.5 2050 3300 472 16 31.5 1500 16 31.5 1730 16 41.5 1840 18 41 2170 4700 682 16 31.5 1840 16 41.5 1930 18 41 2310 6800 10000 103 16 41.5 2260 18 41 2350 V 160 200 250 315 350 400 450 Cap.(F) Code 2C 2D 2E 2F 2V 2G 2W 010 6.3 12 13 6 .3 12 13 6.3 16 14 6.3 16 14 6.3 16 12 8 16 14 8 16 14 1 2R2 6.3 16 23 6.3 16 23 8 16 27 8 16 27 8 16 24 8 20 28 1 0 21 31 2.2 3R3 8 16 33 8 16 33 8 16 33 8 20 36 8 20 32 1 0 21 38 1 0 21 38 3.3 4.7 4R7 8 16 39 8 16 39 8 20 45 8 20 45 10 21 46 10 21 46 10 26 50 10 100 8 20 60 10 21 70 10 21 70 1 0 26 80 13 26 85 1 3 26 85 13 26 85 22 220 10 26 120 1 3 26 140 13 26 140 13 31.5 150 13 31.5 140 16 31.5 150 16 31.5 150 1 3 26 170 1 3 26 170 13 31.5 190 16 31.5 16 31.5 190 16 41.5 210 18 41 230 33 330 210 1 3 31.5 230 13 31.5 230 16 31.5 260 16 31.5 16 41.5 260 18 41 290 47 470 260 Case size Rated ripple D L (mm) 16 41.5 430 1 6 41.5 430 16 41.5 430 100 101 Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Frequency V 120 Hz 300 Hz 1kHz 10kHz or more Cap.(F) 0.47 to 47 1.00 1.35 1.57 2.00 6.3 to 100 100 to 470 1.00 1.23 1.34 1.50 1000 to 10000 1.00 1.10 1.13 1.15 160 to 450 1 to 100 1.00 1.25 1.40 1.60 197