MC1003-000-103 Nidec Copal

CONDUCTIVE PLASTIC 3 TURNS TYPE MC Basic construction RoHS compliant Wiper Resistor Terminal Case Spring Shaft Plate Mounting screw Resistor holder Wiper holder Shaft assy Conductive plastic 3 turns type FEATURES Compact size Fine setting is possible Long life High following characteristics High resolution (Essentially infinite) RoHS compliant PART NUMBER DESIGNATION M C 1 0 0 3 - 0 0 0 - 5 0 2 Series name Nominal resistance value () 502 5 k 10310 k 20320 k LIST OF PART NUMBERS Nominal resistance value () Part number 5 k MC1003-000-502 10 k MC1003-000-103 20 k MC1003-000-203 Verify the above part numbers when placing orders. The products indicated by mark are manufactured upon receipt of order basis. 11 R MC POTENTIOMETERS STANDARD SPECIFICATIONS Electrical characteristics Mechanical characteristics Nominal resistance value 5 k, 10 k, 20 k Mechanical angle 1080 10 Resistance torelance 20 % Stop strength 4.41 Ncm 0.45 kgfcm maximum Resolution Essentially infinite Operating torque 0.294 Ncm 30 gfcm maximum Power rating 0.19 W Rotational life 1 million cycles Independent linearity 1 % Tighten screw torque 49 Ncm 5 kgfcm maximum Effective electrical angle 1080 Environmental characteristics Temp. coefficient of resistance 400 ppm/C maximum Operating temp. range 40 ~ 85 C Insulation resistance 1000 M (at DC250 V) minimum Net weight Approx. 2.5 g Dielectric strength 500 V rms (1 min) Protection grade IP40 RATED POWER DERATING CURVE 100 40 + 40 + 85 Ambient temperature () OUTLINE DIMENSIONS (Unit: mm) 10 6.5 16.1 1.2 12.6 (3.5) Wiring diagram Mounting MAX. 1 face 32 Adhesive thickness 0.5 1 CW 1 M 6 (P = 0.75) 3.7 3.7 1 0.8 Unthreaded portion at base : 1 max. Anti-rotation groove depth A cceAccessorssoriesies Anti-rotation details M6, P=0.75M6, P=0.75 1 9 2 6.4 6.40.63 0.63 M 6 W asher with teeth (M 6 hex.nut) 1 9 9292 11 11 1.3 1.3 Tooth height : 1, No. of teeth : 9 t = 0.63W asher thickness : 1.3 1. Nut 2. Washer 6.3 +0.4 10 0 0 8-0.2 0 3 0.05 4.5 0.6 Power rating ratio (%) 3.7 0.1